Where to Find WPS Pin on HP printer

The WPS setup or the WiFi Protected Setup is the easiest way to complete the setup within seconds. In order to connect the printer with your router with the WPS method, you need to know about the WPS pin. But, most of you don’t know where to find WPS pin on HP printer. So, here are the steps to help you out to find a WPS Pin HP printer. On connecting the printer with the router using the WPS method, you can take the printout from anywhere while being in the proximity range of your router. Usually, during the HP printer setup, when you install the HP printer driver, then a WPS pin is needed. At that time, the prompt will ask you to enter the WPS Pin for your printer. So, let’s get to know about the steps in order to find a WPS Pin HP printer.

Steps for Where to find WPS pin on HP printer

Finding the WPS Pin Printer is not a difficult task if you are doing it in the right way. In order to do so, you need to follow the steps given below:

  • Start your HP Printer with the Power button.

  • Now, on your HP Printer, locate the option of the control Panel.

  • Then, press the wireless button and select the option of Settings.

  • Then, navigate the option of the WiFi Protected Setup.

  • After that, the display of the HP Printer will show you the prompts.

  • Follow the instructions and complete the prompts.

  • In one of the prompts, you will find the option of the Pin.

  • Select that option of the Pin on display.

  • With this, the WPS Pin will get displayed on the HP Printer screen.

Now, you have found the WPS Pin HP Printer, therefore you can use it for your setup. But, if you are confused about how to complete the setup of the HP Printer with a WPS button. Then, to make the process more clear for you, the steps are defined in the next section.

Steps for HP Printer Setup with WPS Pin

  • Turn On your HP Printer.

  • Go to the Control Panel of your HP printer.

  • Tap the wireless settings, and then the Settings button.

  • Then select the option of the WiFi Protected Setup option.

  • The on-screen instructions will open up.

  • Follow the on-screen instructions properly.

  • In the instructions, you will get the WPS Pin for your printer.

  • Now, open the configuration settings for your router in the system.

  • Enter the WPS pin in the designated field of configuration settings.

  • With this, your HP Printer setup is complete.

  • Now, navigate to the All Programs in the Start icon.

  • Locate the HP Folder in this.

  • Then go to the Printer Setup and Software option.

  • Now, select the option of “Connect a New Printer” on your system.

  • Add your device, and you are set to go.

As your printer is now added to the system, so you can take the printouts as per your requirements. 

Easy Setup with WPS Pin HP Printer

As you have seen, if you know about the WPS Pin HP Printer, then the process of setup remains for a few seconds. Moreover, if you don’t know, you can follow the steps mentioned above 

where to find WPS pin on HP printer. Therefore, follow this guide, and complete the easy setup for your HP Printer with WPS Pin.