HP Printer Stuck on Initializing
Is your HP printer stuck on initializing? Wondering how to resolve initializing error in HP printer? Several times, the users face the issue that their HP printer gets stuck at initializing due to which they are not able to print the documents. If you are also facing this issue then don’t fret! We are here to help you. In this article, we have described the best troubleshooting tips that might help you in resolving the HP printer stuck on initializing issue. Let’s get started without any delay.
Simple Steps to Troubleshoot HP Printer Stuck on Initializing Issue
At starting, when the HP printer initiates initializing and the printer’s head starts moving to print rather than standby position. Try to do a hard reset on the HP printer when the printer head keeps moving on every single initialisation either right or left. Follow the below-mentioned steps to fix the issue:
- Step 1: Firstly, ensure that your HP printer is connected to the socket directly. It should not be connected to any surge protector.
- Step 2: Remove the toner and ink cartridge before performing the hard reset on your HP printer.
- Step 3: After that, switch off your HP printer. For this, you need to disconnect the power cord from your printer from the backside of your printer. Make sure that your printer is turned on.
- Step 4: Unplug the power cord from the power socket of your printer.
- Step 5: Remove the USB cable if any connection is made with your printer.
- Step 6: Now, wait for some time. Thereafter, press and hold the power button on your printer for around 30 seconds.
- Step 7: In the next step, plug in the power cable back directly to the power socket without using any protector extension cord. Also, plug the power cord into the HP printer.
- Step 8: Wait for some time until the initial reboot is completed.
- Step 9: Insert the ink cartridges and try to test print the documents.
How to Avoid Initializing Error in HP Printer?
Look at the below simple steps to avoid the HP printer stuck on initializing issue so that you will not face this type of problem. Follow the below steps properly without making any mistake:
- Step 1: Firstly, unplug the printer’s USB cable, network cable, and power cable.
- Step 2: After waiting for 30 seconds, plug them back into their place.
- Step 3: In the next step, turn on your HP printer. Tap on the Copy and cancel button when it says permanent storage initialize.
- Step 4: The alternative method is to turn on the HP printer and click on the right arrow and cancel button when it says permanent storage initialize.
- Step 5: Thereafter, download the latest available firmware and install it into your device. One thing that you have to remember is that use the USB cable to carry out this step. Do not update the firmware over the network.
- Step 6: In case, your router does not support IPV6 then disable it from your HP printer.
- Step 7: At last, check whether your printer starts working on not.
Great! We hope by following the above-mentioned instructions, you can easily troubleshoot the HP printer stuck on initializing issue without any hassle. Although, if you have any doubt and face difficulty in resolving initializing error in HP printer issue then it is suggested to contact our technical experts for the best assistance. Feel free to contact us at our toll-free number at any time 24×7.