HP Neverstop Laser MFP 1202W Wireless Setup

Do you want to perform HP Neverstop Laser MFP 1202 wireless setup? Most of the users are asking how do I connect my HP Laserjet MFP 1202 to WiFi? If you are the one who has the same question and looking for the answer to this question then don’t fret! You have reached the right place. Here, we have discussed the step-by-step instructions that help you in connecting your HP nerverstop laserjet MFP1202W to the wireless connection. Once you are connected with the WiFi network, you can take the print out from your device without any trouble. Keep reading the article and know the way for HP neverstop laser mfp 1202w wireless setup. Let’s get started. 

How Do I Connect my HP Laserjet MFP 1202 to WiFi?

Look at the below instructions to connect the HP laserjet MFP 1202w to the wireless network. You need to go through with the instructions listed below:

Step 1: Before starting the wireless connection setup, firstly turn on the HP laserjet mfp 1201 printer. After that, you need to check whether you have completed the basic printer settings or not.

Step 2: Switch on your computer and wireless router. 

Step 3: Thereafter, connect your computer or laptop to the wireless network. Ensure that your device is getting the proper internet signals.

Step 4: Search your WiFi SSID and the network key for the future. You can find these details on the label located at the back side of the wireless router. 

Step 5: Next, press the wireless button given on the control panel of your printer. You need to hold the button for 5-7 seconds.

Step 6: In the next step, go to the WiFi router and press the WPS push button within 2-3 minutes.

Step 7: Once the connection has been set up successfully, you will see that the power LED light on your printer will turn to solid and green.

Step 8: Now, install the printer drivers and software on your computer with the help of a CD setup.

Step 9: If you want to download the printer driver from the HP official website then you need to launch the installer file to run the printer driver setup file. 

Step 10: When you reach the HP Easy Start window, read the privacy policy and choose “I have reviewed the policies and accept the HP privacy statement and data collection settings checkbox. 

Step 11: Tap on the Continue button to proceed further. 

Step 12: If your printer and computer are connected to the same wireless network then your HP printer will be detected automatically by the software of your printer.

Step 13: Choose your printer if available from the choose printer screen. Tap on the continue button to proceed further.

Step 14: In case your printer is not displayed on your screen then tap on “My printer is not listed” option.

Step 15: Select the connection method and then wait for some time until your printer is detected by your printer software automatically. 

Step 16: Choose your printer software you want to install. Tap on the continue button.

Step 17: Next, wait for some time until the installation is completed. 

Step 18: Follow on-screen instructions to complete the printer driver setup and the wireless setup.