Epson artisan 1430 wifi setup

Step-by-Step Guide for Epson Artisan 1430 WiFi Setup

Step-by-Step Guide for Epson Artisan 1430 WiFi SetupWondering how to do Epson Artisan 1430 setup? Fails to do Epson Artisan 1430 WiFi setup? You do not need to be worried! Here, you will get the answers to all of your queries. Let’s get started. 

Introduction to Epson Artisan 1430 Setup

Epson Artisan 1430 is a compact size professional printer that offers ultra-high-quality printing and helps in reducing the printing cost. It also has the feature of a wireless network that makes the printing process easy and you can also share photos and documents easily with others. This printer has an advanced color that prints amazing photos which are fade-free, water-resistant, smudge-free, and scratch-free.

Steps for Epson Artisan 1430 Setup for the First Time

Go through the below steps to complete Epson Artisan 1430 Setup for the first time after purchasing the printer:

  • Firstly, unbox your Epson Artisan 1430 printer by removing packaging material and tapes.

  • In the packaging box of the printer, you will find photo papers, CD, manual guide, ink cartridge, start sheet, and Epson Artisan 1430 printer. 

  • Take out all the materials from the box with the printer.

  • Remove the plastic bag from the printer and ink cartridges.

  • Open the scanner lid of your printer. On the right side, you will find the ink cartridge area. Insert the cartridges in the allotted space.

  • Connect your printer to a power outlet using the power cord. 

  • Turn on your printer by pressing the power button on an Epson Artisan 1430 printer.

  • In the next step, the ink cartridge installation process is initiated which takes some time.

  • You can start printing after the completion of the installation process.

  • Close the scanner lid.

Detailed Steps for Epson Artisan 1430 WiFi Setup

Before initiating the Epson Artisan 1430 WiFi setup, make sure to place your printer nearer to the wireless router. It will reduce the signal distortions between the devices and helps in connectivity and speed. 

Steps for Hardware Setup of Epson Artisan 1430 Printer

The first step in the Epson Artisan 1430 WiFi setup is hardware setup. Follow the below steps for hardware setup for your Epson Artisan 1430 printer:

  • Firstly unbox the Epson Artisan printer and remove the plastic packaging and tapes from the printer. Take out the cables and accessories that come along with the printer.

  • Plugin the printer into the electrical socket using the power cord. After that, turn on your printer by pressing the power button. 

  • Press the push button on the printer for 3-4 seconds and release it. 

  • Open the access door of the ink cartridge and take out the ink cartridge from it.

  • Peel off the packaging and yellow tape of the ink cartridge from every side.  

  • Now, move the cartridge back and forth gently as it helps in spreading the ink throughout the ink cartridge. If you skip this step then it may affect the print quality. Some pages will come out too dry or some too soggy. 

  • After that, install the ink cartridge back to its original place. When the cartridge gets to its original position then you will hear a click sound.

  • In the next step, pull out the input paper tray from your printer and load enough papers into it. Align them properly according to the paper guide and put them back into your printer. 

  • Once, you install the CD, connect your printer to the computer. After that follow on-screen instructions to set up your printer hardware.

Eight Simple Steps for the WiFi Protected Setup

With the WPS feature of your router, you can easily connect your Epson Artisan 1430 printer to the wireless network. If WPS is enabled in your router then you will easily locate the WPS push button on your router. The router also has a virtual WPS feature which you search on the software. Look at the below steps for the WiFi Protected Setup:

  • Click on the “Home” button.

  • Tap on the “Setup” option and then the “Network Settings” option. 

  • After that click on the “WiFi setup”. 

  • In the next step, press the WPS button on your router. Also, press the WPS button on your Epson Artisan 1430 printer.

  • Ensure to press the WPS button of your printer under three minutes after releasing the WPS button on the router.

  • If the blue LED power light blinks on the Epson Artisan 1430 printer then it means the Epson Artisan 1430 WiFi setup process is done successfully. 

  • At last, you will see the “Network” icon at the top of the LCD blinks.