HP Printer Out of Paper Reset

HP Printer Out of Paper Reset

Struggling in printing the documents from your HP printer? Are you getting an error message HP printer out of paper reset issue? Wondering how you fix HP printer out of paper error when it’s not? Well, if the answer to the above questions is yes then don’t panic! You have reached the right spot. Here, in this article, you will get to know the reason as well as troubleshooting tricks to resolve the issue. Let’s get started without any further delay. 

Common Reasons Behind HP Printer Keeps Saying Out of Paper 

There could be several reasons behind HP printer out of paper error. Some of the reasons are listed below. Look at the below reasons:HP Printer Out of Paper Reset

  • Outdated printer drivers
  • Use of low-quality paper
  • HP printer’s paper feed roller may be choked with dust or paper debris
  • Use the printing paper with curled edges
  • HP printer is not compatible with your Windows PC
  • Overloaded input tray of HP printer
  • Several pending printing jobs that stuck in the printing queue of HP printer
  • Problem in print spooler service 

How to Fix HP Printer Out of Paper Error When it’s Not?

Look at the below troubleshooting tips to fix the HP printer out of paper error when it’s not. Follow each of the step carefully:

Method 1: Check the condition of printing papers before loading 

When the printing papers are not placed in proper manner then you may get HP printer out of paper error. Follow the below steps to resolve this issue on your HP printer:

  • Make sure that you are using the same size and type sheets.
  • Try to place only 25 or less than 25 sheets in the input tray of your printer. 
  • Align the printing papers properly. Make sure that the paper bundle is uniform.
  • Ensure that the paper sheets that you have placed for printing are not damaged or curled from the edges. 
  • Use only good quality papers for printing.

Method 2: Clean Paper Feed Roller of HP Printer

There may be a possibility that your HP printer says out of paper error due to a dirty paper feed roller. Follow the below steps to clean the paper feed roller:

  • Firstly, turn off your HP printer.
  • Unplug the power cord from your device.
  • Make sure that there are no sheets placed in the input tray. If there is any sheet placed in it then remove it.
  • Open the access cover of your printer.
  • Now, look for the paper feed roller. 
  • Next, take a clean cloth and dip it into the distilled water.
  • Thereafter, use that cloth to clean the paper feed roller. 
  • After that, you need to wait for sometime until the paper feed roller becomes dry.
  • Make sure to not use the hair dryer or compressed air to dry teh roller.
  • When the roller becomes dry then place papers in the input tray of your printer. 
  • Close the access cover of your HP printer. Now, wait for some time until your printer gets in the idle mode.
  • Try to print the documents. 

Method 3: Check Rear Panel Cover of HP Printer

There is a possibility that the rear panel located at the back of your printer might not be placed fully. So, you need to turn your HP printer around and check whether the rear panel is placed properly or not. Also, check for any paper jam. You need to remove the rear panel and crumpled paper if any. 

Method 4: Reset the HP Printer 

Resetting the HP printer might be complicated. For this, you need to unplug the power cable without switching off your printer. After that, wait for some time before plugging the power cable to your printer. If your printer does not turn on automatically then press the power button to turn it on. 


HP LaserJet Pro MFP M28w Wireless Setup

HP Laserjet Pro MFP M28W Wireless Setup

Are you looking for HP Laserjet Pro MFP M28W wireless setup? Struggling with HP laserjet Pro MFP M28W connect to WiFi? Want to print out the documents wirelessly? If you are also the one who is looking for the answer to these questions then don’t panic! Also, you do not need to do further search. Here, in this article, we have shared the simple instructions that assist you in the HP Laserjet Pro MFP M28W wireless setup. Let’s get started without any delay. 

Instructions for HP Laserjet Pro MFP M28W Wireless Setup

The steps for HP Laserjet Pro MFP M28W wireless setup for Windows and Mac devices are little different. In this section, we have described the instructions for HP laserjet pro mfp m28w wireless setup for Windows and Mac devices.

For Windows 

Follow the below steps for the HP Laserjet Pro MFP M28W wireless setup for Windows devices:

Step 1: Firstly, connect your printer to the wireless network. For this, you should know the network name and password.

Step 2: After that, switch on your router, printer and computer.

Step 3: Next, you have to remove the unwanted things from your printer.

Step 4: Thereafter, go to the control panel and then tap on the wireless option for the wireless connection setup. 

Step 5: Click on the wireless setup wizard and then search for your wireless network name. Hit on the Ok button. 

Step 6: Now, change the settings of your wireless network according to your requirements. 

Step 7: Once you establish the connection successfully, select the file from Windows and then try to take out the printouts. 

For Mac Devices 

Go through the below steps for HP Laserjet Pro MFP M28W wireless setup for Mac devices:

Step 1: For starting the wireless setup on your Mac device, you firstly understand the version of your OS to know the best method.

Step 2: After that, download and install the advanced printer drivers and software for your printer. Thereafter, go to the network connection option. 

Step 3: To establish the connection successfully, you have to tap on the Apple menu and then select the desired option from them. 

Step 4: Next important thing that you need to know is details about your router. 

Step 5: In the next step, do all the essential changes in your network settings according to your requirements. 

Step 6: Press the button located on your router and wait for some time until you establish the connection successfully. 

Step 7: Once you establish the connection successfully, your computer is ready to take out the top-quality print out. 

Steps for the Wireless Setup of HP Laserjet Pro MFP M28W via WPS Button

Look at the below instructions for the wireless setup of the HP Laserjet Pro MFP M28W printer using the WPS button. By using this option, you can take the print out from your system using the same network without connecting your printer to the computer physically. Follow the below steps for the HP laserjet Pro MFP M28W connect to WiFi:

Step 1: Firstly, remove the packing material from all around your printer including tapes. 

Step 2: After that, connect the power cable to the power outlet and turn on your printer. 

Step 3: Next, install the print cartridges. Also, allow your device to begin the startup process such as printing an alignment page. 

Step 3: Make sure that your printer and the wireless router are supporting the push button mode. You also need to look at the manual of your printer for wireless printer setup. 

Step 4: Check whether your wireless printer has a WPS button or not as without it you cannot carry out the setup process. 

Step 5: Ensure that your network has WPA or WPA2 security. If you do not have the WPS security then you are unable to connect the WPS wireless router.

Step 6: If you are using the default settings then there is a possibility that you are unable to establish the connection. 

Step 7: If you want to connect your router to the printer wirelessly then press the WPS push button mode on your HP printer. 

Step 8: To know the way to switch on the WPS push button on the wireless router, check the manual that comes with your printer. 

Step 9: In the next step, press the WPS button on your wireless router. 


Connect HP Printer to New WiFi

Connect HP Printer to New WiFi

Struggling to connect HP printer to new WiFi? Wondering how to connect HP printer to WiFi? Well, the several new advancements in the technologies enables the user to print the documents wirelessly. Now, you can easily print the documents even from your mobile devices. If you are also looking for the steps to connect your HP printer to the WiFi connection then you have reached the right spot. Here, in this article we have shared the simple instructions that help you in connecting your HP printer to the wireless connection. Check out the steps. 

How to Connect HP Printer to WiFi?

There are different methods by which you can connect the HP printer to WiFi connection. Here we have described some simplest methods by which you can connect HP printer to new WiFi.

Method 1: Using Wireless Setup Wizard

Follow the below steps to connect the HP printer to WiFi connection using the wireless setup wizard:

  • Go to the HP Printer and press the power button for some time to switch on your HP printer.
  • After that, disconnect any internet cables or USB cables which are attached with your printer.
  • Next, you have to search for the Control Panel on your HP printer screen. Once you find it, click on it.
  • Thereafter, tap on the wireless icon and then select the “Network Menu” option to open it.
  • In the next step, you need to choose the “Wireless Settings” from the drop-down option and then tap on the “Wireless Setup Wizard” option. 
  • Search and tap on the “Network” by clicking on its name. Enter “WPA” or “WPS” password to configure your internet connection. 
  • At last, tap on the Ok button to complete the process of connecting your HP printer to the WiFi connection. 

Method 2: Through WPS Method 

Go through the below guidelines to connect HP printer to new WiFi through WPS button: 

  • Firstly, switch on your HP printer. After that, tap on the WPS button.
  • Once you turn on the WPS button, ensure that your wireless router starts working within 2-3 minutes. 
  • After that, your computer or laptop whatever you are using prompts you to enter the WPS password. 
  • Enter the WPS password manually and follow on-screen instructions to complete the WiFi Protected setup. 

Steps to Resolve HP Printer is Not Connecting to WiFi 

Look at the below instructions to troubleshoot the HP printer is not connecting to WiFi connection issue:

Step 1: The first step is to check the network connectivity and internet connection on your device.

Step 2: Make sure that your HP printer and router is turned on. 

Step 3: Next, go to the Control Panel of your HP printer and select the network configuration page. Check whether you are facing any error or not. 

Step 4: The frequency of the router may also create WiFi connectivity issues. So, make sure that the frequency of your router is between 2.4 GHz and 5.0 GHz. 

Step 5: Make sure to place your HP printer within the range of the wireless networks. It should be placed within 30m away from the router. 

Step 6: Check whether you have installed the printer drivers and software properly on your system or not. If you have installed such drivers that do not support your printer then you may face the issues. 

Step 7: Restart your device and remove the Ethernet cables and USB cables. 


HP ePrint Setup

HP ePrint Setup

Do you want to use the ePrint feature to print the documents? Wondering how to set up ePrint on HP printer? Well, you have reached the right platform. We are here to assist you in the HP ePrint setup. HP ePrint is an amazing application with which you can print the documents from any wireles network connected to your device through an HP printer. With an active network connection, you can easily print the documents from any place. You just need to create an email address for your HP printer and then send the documents to that email address that you want to print. Here, in this article, we have shared the step-by-step instructions for HP ePrint setup

Instructions to Configure ePrint on HP Printer

Look at the below steps to configure ePrint on your HP printer:

Step 1: To install the ePrint on an HP printer, you need to check whether your printer model supports the ePrint feature or not. 

Step 2: Check the HP ePrint logo displays on the control panel of your printer. If you do not find the logo then it means that HP ePrint is not compatible with your printer model number. 

Step 3: After that, connect one end of the power cord to the back of your HP printer and the other end to the power socket. To switch on your printer, you need to press the power button.

Step 4: Now, wait for some time until your printer is being ready. Once your HP printer becomes idle then connect it with the wireless network.

Step 5: If you are using a wired cable, then insert the LAN cable into your HP printer. Push the cable until it fits properly into it. You need to check for the stability of the network. 

Step 6: In case, you are using the wireless link then you need to go to the wireless option in your printer by tapping on the wireless icon. Follow on-screen instructions and then select your wireless network. 

Step 7: Next, you need to click on the Network Setup option or HP ePrint. Switch on the web services option on your printer. Wait for some time until web services are enabled.

Step 8: Now, hit on the Print info option. The print info sheet is printed which contains the distinctive HP printer email address. 

By following the above-mentioned steps, you can configure ePrint on an HP printer. You need to ensure that your printer is connected to a secure wireless network. 

How To Set Up ePrint on HP Printer?

Go through the below instructions for HP ePrint setup on your device after installing the HP ePrint software:

Step 1: Firstly, check the compatibility of your HP printer with HP ePrint software.

Step 2: After that, configure the settings of your HP printer and the basic security. 

Step 3: Follow on-screen instructions and the guidelines mentioned in the user manual that comes with the HP printer to configure it. 

Step 4: Make sure to add your HP printer to HP Connected. You will get the instructions on the user manual to add the printer to HP connected. 

Step 5: In the next step, download and install the HP ePrint software on your computer. Go to the HP printer official website and then download the software. Install the software properly on your system.

Step 6: Once you install HP ePrint on your computer, register it to start the operation of printing the documents. 


HP ePrint Not Working

HP ePrint Not Working

Having an issue that HP ePrint not working? Are you looking for a solution to fix HP ePrint problems? If the answer is Yes, then you will find this article useful as it described the reasons for the occurrence of the issue with HP ePrint and the steps to fix it. HP ePrint is an amazing technology with which you can print photos and documents from any place in just one click from your computer, laptop, or smartphone. Although, you can also print the documents by using this app by sending the email to HP printer. Here, you will learn the simple steps for troubleshooting HP ePrint problems. 

Troubleshooting HP ePrint Problems

Sometimes, there can be instances that HP ePrint is not working and is unable to print the documents. It happened due to a network issue or wrong printing settings. Look at the below-mentioned instructions to troubleshoot HP ePrint not working issue. 

Method 1: Check the Printer Status

If HP ePrint is not working then the first step is to check the status of your HP printer. It may happen because your printer is not getting the proper internet connection. Ensure that your Hp printer is turned on and connect with the high-speed internet connection. Follow the below steps to check the printer status:

Step 1: Turn off your HP printer.

Step 2: Test your printer by printing the document using the local network.

Step 3: After that, make sure that the web services should be enabled on the HP printer. 

Step 4: If your printer has a touchscreen then you have to click on the HP ePrint option and tap on Settings. The alternative way is to tap on the web services under the network setup or wireless settings. 

Step 5: If your printer has not touchscreen then print the document to get the IP address. Enter the IP address in the web browser and open the “Embedded Web Server”. Enable the web services. 

Method 2: Resolve the Network Connection Issue

Due to the network connection issue, there may be a possibility that HP ePrint not working. In case, you find any problem with the signal then you can fix it. Follow the below steps to do so:

Step 1: Check that your HP printer is turned on.

Step 2: Make sure that your printer and computer are connected to the same network. 

Step 3: In case, your HP printer has a wifi icon with a blue LED light on the control panel then ensure that the wireless icon is turned on and not in the flashing mode. 

Step 4: If your printer has the option of the wireless setup in the control panel then you can utilize this wizard. It will assist you in connecting your HP printer to the wireless network. 

Step 5: If you are receiving poor or weak WiFi signals then make sure that you have placed the computer and printer nearer to the wireless router. 

Step 6: Reboot your router and check whether the issue gets resolved or not.

Step 7: Check the settings of your router band and ensure that the HP printer supports the frequency bands 2.4 GHz and 5.0 GHz. 

Step 8: Next, you need to check the firewall software which prevents your HP printer from accessing the computer system. 


Network Printer not Printing

Network Printer not Printing

Does your network printer not printing? Are you looking for the network printer printing problems troubleshooting? So, if you are one of those people who does not know the way to troubleshoot network printer not printing issues then don’t fret, we are here to help you. A network printer is such a type of printer with which you can access the network connection. You don’t need to go anywhere else. In this article, you will learn the simplest way to troubleshoot the network printer printing problems. So, let’s get started without any delay. 

Steps for Network Printer Printing Problems Troubleshooting 

If you have a wireless printer and after settings it up, you are getting problems with your printer to print the documents then go through the below steps to review the network printer settings. These steps will help in troubleshooting the network printer not printing issue: 

Step 1: Restart all of your devices

The wired or wireless network printers depend on the home network. It consists the several components such as a computer, printer, modem, wireless access point, and router to connect with the internet connection. It is essential that your network should have additional items with some components. Try to restart all of your devices such as a router, modem, printer, and computer. After that, print the documents and check whether the printing issue is get resolved or not. 

Note: Make sure to not reset your device to the factory default settings as it may delete all the customized settings made by you. It also removed the data and settings made on your device. Instead of resetting your device, simply restart your device. 

Step 2: Check the Network Printer Connectivity

Print a test sheet or configuration from your printer. With the network printers, this test sheet describes the way your printer is connected to the network such as a URL for accessing the administrative page, IP address, and the network connection type. You need to check the printer manual to do the local test print. After test printing, you need to ensure that your printer is connected to the network through IP address. This IP address should be the same as that of the address on your network. If your IP address starts with 169 then it means that your printer could not connect with your network. 

Step 3: Reconfigure the Network Settings of your Printer

If your printer cannot connect with your network then start again. Firstly, switch off your printer and disconnect your printer from the network. Also, reinstall your printer by following the instructions given in the manual. You need to make a record of network passwords and the printer that you are using. 

Step 4: Reinstall or Reconfigure the Network Drivers for your Printer

When your printer is communicating over the network then you need to configure or install the network drivers for your printer such as Cloud Print for Android devices or AirPrint for iOS devices. 

Step 5: Test the Printer Drivers

When you install the new printers on your network then you need to wait for some time. After that, check the printer driver whether it is working properly or not. Make sure that the printer drivers that you have installed on your system are supporting your system and are of the latest available version. 

 


HP Printer Slow Printing

HP Printer Slow Printing

Are you struggling with HP printer slow printing? Wondering why HP printer printing slow? Well, most of the users are also complain about the same issue. It mainly occurs when you print the documents with maximum DPI or choose the best printing mode for executing printing operations. It degrades the speed of the printer. You can easily check the speed of your printer for printing through printer driver settings. If your printer is working slowly then it means that it consumes more ink and takes more time in printing the documents. Do you want to know how to fix the HP printer’s slow printing issue? You don’t need to go anywhere else. Just scroll down and check out the steps to fix the slow speed of your printer. 

Why HP Printer Printing Slow?

Go through the below common reasons behind the HP Printer slow printing issue: 

  • HP ink cartridge or toner cartridge issues
  • Paper jam problem
  • Outdated, missing, or corrupted printer drivers
  • Poor HP printer configuration
  • Establish faulty connections or USB cables not working
  • Printer server is overloaded
  • HP printer is connected to the shared network
  • Ink cartridge cannot handle more printing load
  • No ink or toner in HP printer
  • Incorrect printing preferences 

Troubleshooting Tips for HP Printer Slow Printing Issue

To resolve the HP printer slow printing issue, go through the below steps:

Method 1: Reset HP Printer

Some unresolved problems like ink or toner will make the speed of the HP printer slow. Reset of the HP printer may solve this problem. Follow the below steps to reset the HP printer:

Step 1: Firstly, start your HP printer.

Step 2: Make sure that your device is idle and not making any type of noise.

Step 3: Remove the power cable of the printer from the backside of the printer.

Step 4: Unplug the power cable and wait for some time.

Step 5: Next, connect the power cable again to the wall socket and printer.

Step 6: Turn on your printer and make sure that the printer is silent or idle.

Step 7: Try to print the document.

Method 2: Check Printer Setting and Select Plain Paper Option

If you have selected the high-quality paper option then you will find that the printer speed gets reduced. So, it is important to make the settings appropriately:

Step 1: Firstly, press the Windows key and search for the “Devices and Printers” option.

Step 2: Click on the printer icon twice.

Step 3: After that, click on the “Preferences” and find the paper which you are using.

Step 4: Thereafter, go to the “Paper Type” and select the “Plain Paper”.

Step 5: Tap on the “Draft” or “Normal” option under the “Quality Settings”. Tap on the Apply button.

Step 6: Next, exit from the “Devices and Printers” option and HP Driver.

Step 7: Try to print the document to check the printing speed. 

Method 3: Check the Signal Strength of the Network

Decrease speed of the signal strength also reduces the printing speed. Follow the below steps to check and fix the signal strength of the network:

Step 1: Go to the Taskbar option under Windows and then choose the “Wireless Connection” option.

Step 2: After that, search for the signal strength of your wireles network. 

Step 3: If the signal strength is low then assemble the router, PC, and HP printer. 

Step 4: Once assembling, you need to stop the additional internet-based apps.

Step 5: Use an Ethernet cable to establish a network connection. 

Step 6: Unplug the wireless router and then plugin again after some time.

Step 7: Reboot the router and make sure that your printer is turned on.

Step 8: Try to print the document. 

Method 4: Check and Replace the Ink Cartridge 

A single ink cartridge is needed for printing purposes. It will add the load to the ink cartridge. The presence of one ink cartridge will decrease the speed of the printer. To resolve this issue, remove the ink cartridge and install it again. Make sure to check the ink cartridge from time to time and if there is any issue then replace it immediately.   


HP Officejet 4630 Troubleshooting

HP Officejet 4630 Troubleshooting

Struggling with different HP Officejet 4630 printer issues? Wondering how to fix HP Officejet 4630 printer problems? Well, with so many amazing features offered by HP Officejet 4630 printer including excellent printing quality, easy setup, etc, there are some working problems with this printer. There may be numerous reasons for the occurrence of the issue but the main concern is how to perform HP Officejet 4630 troubleshooting whenever any printer issue is encountered. It is essential to fix the issue whenever a printer problem occurs. In this article, we have described some simple ways to fix the issues associated with the HP Officejet 4630 printer without any help from external assistance. Let’s go ahead. 

Simple Steps for HP Officejet 4630 Troubleshooting

Go through the below steps to fix HP Officejet 4630 printer problems. Here, we have described some common problems of the HP Officejet 4630 printer with its solution:

Problem 1: HP Officejet 4630 Printer Driver Unavailable

Follow the below steps to resolve HP Officejet 4630 printer driver issue:

Step 1: Firstly, download the HP Easy Start software from your computer or laptop.

Step 2: After that, go to the folder where you have saved the HP easy start driver.

Step 3: Launch the saved software and choose the “scan now” option.

Step 4: Thereafter, tap on the update option from the official website.

Step 5: Turn off your printer and wireless router.

Step 6: Also, power off your Mac or Windows computer.

Step 7: Disconnect the USB cable from your device.

Step 8: Wait for some time and then turn on your computer and printer.

Step 9: Next, activate the WiFi router.

Step 10: At last, whether the printer driver or software are installed properly on your system or not. 

Problem 2: Printer is not Connecting to WiFi Connection

It is a common issue that you may face with your HP Officejet 4630 printer. Follow the below steps to troubleshoot the issue: 

Step 1: Firstly, go to the official website of your printer. 

Step 2: Choose the setting of the printer network.

Step 3: After that, access the wireless setup wizard.

Step 4: Thereafter, you will see the list of all the WiFi networks displayed on the printer panel.

Step 5: Select the WiFi option on your device and tap on the Continue button.

Step 6: Next, proceed with the wireless setup wizard procedure and then complete the ongoing procedure.

Step 7: In case, your HP Officejet 4630 printer is not showing the printer screen then select “Add network”. 

Step 8: Enter the user ID of the wireless network with its security key. 

Step 9: Follow on-screen instructions to complete WiFi setup on your printer. 

Problem 3: Printer Offline Error 

Look at the below steps to fix HP Officejet 4630 printer is showing offline error:

Step 1: Restart your printer, router, and computer.

Step 2: After that, check whether your printer is showing online or offline. If it is offline then go to the next step.

Step 3: Open the settings from your device and then select the Printers option. 

Step 4: Choose your printer and then right-click on the “Use Printer Online” option.

Step 5: Thereafter, your HP Officejet 4630 printer is set to the online mode automatically.

Step 6: If it still shows offline then remove the ongoing print jobs. 

Step 7: Next, click on your printer name twice and select the “Printer Menu”.

Step 8: Cancel all the commands of printing and then switch to your printer.

Step 9: Make sure that there is not any jammed paper in your printer. 

Problem 4: Printer is Unable to Scan 

Sometimes, when you are trying to scan the documents then it fails. Follow the below steps to fix the HP Officejet 4630 unable to scan issue:

Step 1: Turn off your printer.

Step 2: Disconnect the USB cables that connect your printer with your computer.

Step 3: Stop all the running programs.

Step 4: After that, turn off the computer and also remove all the power cables attached to it.

Step 5: Switch on your printer and make sure that you have done each of the settings accurately. 

Step 6: Next, connect your HP Officejet 4630 printer with the power outlet with the help of a USB cable. 

Step 7: Turn on the computer and make sure that you have connected your computer with your printer.

Step 8: At last, open a document and scan it properly. 


How to Install HP Deskjet 1515 Printer Without CD

How to Install HP Deskjet 1515 Printer Without CD?

Struggling with HP Deskjet 1515 installation? Wondering how to install HP Deskjet 1515 printer without CD? Well, if the answer to the above questions is yes then don’t fret! You have reached the right spot. We are here to assist you with the simple steps for installing your HP Deskjet 1515 printer without utilizing a CD. Sometimes, there is a situation in which your printer does not come with a CD and you have to install the printer driver without it. In this article, we have described some simple guidelines to install HP Deskjet 1515 printer. Keep reading the article till the end and check out the simple steps for it. 

HP Deskjet 1515 Printer

The HP Deskjet 1515 printer is one of the ultimate single-functionality printers suitable for those whose printing requirements are minimum. It provides decent printing quality at reasonable prices. The compact and lightweight design of this printer make it best for fulfilling the daily printing requirements. To get the high-quality printing, you just need to connect your HP Deskjet 1515 printer to your system through a high speed USB 2.0 port. The printer that does not support Ethernet connection or wireless connection enables it to connect to the internet connection. 

How to Install HP Deskjet 1515 Printer without CD?

Go through the below steps for HP Deskjet 1515 installation. You need to follow these steps carefully to install your printer successfully on your device without using a CD. For this, you need to download the printer driver or software from the official website. 

  • Step 1: The first step is to visit the official website of the HP Deskjet 1515 printer from your computer or laptop.
  • Step 2: If you do not have the Software and Driver package then you need to tap on the “Software and Drivers” option. Thereafter, you will be navigated to the “Software and Drivers” webpage.
  • Step 3: Once you reach the “Software and Drivers” page, you will view the options like all drivers, basic drivers, driver-product installation software and utility-diagnostic tools. 
  • Step 4: After that, you will see the Recommended sign in green in color with the HP deskjet 1515 printer series printer driver and software full feature option under “Driver-Product Installation Software”. 
  • Step 5: When you expand this option, you can see the details of the printer driver including driver version, type, supported operating system and many more. You will also see a download button blue in color situated opposite to this option. 
  • Step 6: Next, hit on the Download button.
  • Step 7: On the next page, you will see a file having the extension .exe. 
  • Step 8: Now, you can either double-click on the displayed file to initiate the installation process or can go to the Download folder from your computer and search for downloading the printer driver file option. 
  • Step 9: Once the printer driver software installation process is started, you are required to follow all the steps displayed on the screen to complete the installation process. 
  • Step 10: When the HP Deskjet 1515 installation is over then you will see a massage on your screen saying the installation process is completed successfully. 
  • Step 11: At last, restart your system after installation of printer drivers.

That’s All! With the above-mentioned instructions, you can successfully complete the HP Deskjet 1515 installation process on your computer or laptop without using the CD. If you have any doubt or are facing difficulty in installation of the HP Deskjet 1515 printer then you can contact us at our helpline number at any time for immediate solution of your problem. Feel free to call our support team.


HP Printer won’t Connect to Computer

HP Printer won’t Connect to Computer

Trying to connect your HP printer to a computer? Is your HP printer won’t connect to computer? Wondering how to troubleshoot HP Printer won’t connect to WiFi issue? If so, then don’t be fret! You have reached the right place. This blog assists you with simple instructions that help you in resolving HP printer won’t connect to computer and WiFi issues. Let’s get started to check the simple guidelines for establishing all the connections properly so that you will never face any issues. 

Troubleshoot HP printer won’t Connect to Computer

There are different reasons due to which your HP printer won’t connect to a computer or is unable to detect your printer. It includes incompatible printer driver or software, dust obstructing USB port, lack of use, poor USB connection, etc. Look at the below methods for fix HP printer won’t connect to computer:

Method 1: Remove Dust from the USB port of the printer

It is important to clean the USB port of the printer from time to time for establishing a successful connection. You need to check the USB port for dust. Before establishing a connection, make sure to remove the dirt by blowing or wiping with a dry cloth. Thereafter, reconnect the devices again. It may resolve the problem and your computer can able to detect your printer. 

Method 2: Check the Printer driver compatibility with your HP printer

When the printer driver on your computer becomes obsolete or outdated then your printer will not detect the computer. Follow the below steps to check for update availability: 

  • Open settings from the computer.
  • Go to Update and Security.
  • At last, hit on the “Check for Updated” option. 

If any of the updates are available then update your printer driver for the latest available version and restart the computer.

Method 3: Does not use the HP printer often

If you use your printer very less then dirt can be gathered on the mechanics. At that time, your computer won’t be able to detect the printer. To fix this issue, wipe your printer regularly. If your printer has a lot of dust already then use the air duster to clean it from inside. 

Method 4: Connect the USB port of the cable to your device properly

If you connect both ends of your printer’s wire properly then you will not face any connection issue. If your HP printer won’t able to detect the computer then check the cable connection established by you. Any loose connection may create the issue. So, check whether you have inserted the wires properly on the USB port or not. 

HP Printer won’t connect to WiFi? What to Do Next

Most of the users complain that whenever they are trying to connect with the WiFi connection then an error message is displayed on the screen saying unable to connect with WiFi. This error is occurred due to an outdated or corrupted printer driver, the printer is offline, or wireless connectivity issue. Go through the below methods to troubleshoot the HP Printer won’t connect to WiFi issue:

Method 1: HP Auto Wireless Connect

Try to connect your printer to WiFi through HP Auto wireless connect in which you connect your printer manually. Follow the below steps to connect the HP printer to the WiFi network automatically using HP Auto wireless setup:

  • Firstly, open the HP Support page from your computer and enter the model number of your printer. Tap on the submit button. 
  • Choose your operating system and download the printer drivers or software.
  • After downloading, complete the installation process.
  • In the next step, turn on your HP printer and run the downloaded software.
  • Thereafter, your system will ask for the type of network connection whether it is Wireless or Ethernet. 
  • Choose the wireless network and tap on the Yes button. Also, send the wireless setting to your HP printer. 
  • Wait for some time so that printer is connected to the computer. 

After following the above steps, you will never face the problem of connecting your HP printer to a WiFi connection and can start using your printer. 

Method 2: Use Wireless Setup Wizard

You can connect your HP printer to WiFi with the help of the wireless setup wizard. It is only applicable to those printers that have control panel displays. Look at the below steps for wireless connection steup:

  • Switch on your printer.
  • Unplug the USB cables or Ethernet cables from your HP printer.
  • Click on the wireless icon from the control panel of the HP printer and then go to the Network menu.
  • Next, tap on the wireless settings and then visit the network menu.
  • Select the wireless settings and then click on the wireless setup wizard. 
  • Search for your wireless network and enter the WEP/ WPA key. Tap on the Ok button. 

That’s All! Hopefully, the above-mentioned troubleshooting tips will help you in fixing HP Printer won’t connect to WiFi and HP printer won’t connect to computer issue. All the steps are very simple and help you in resolving the issue faced by you in establishing the connection with your computer and WiFi.