Canon MG3200 WiFi Setup

Canon Printers are always considered the best for printing and scanning purposes. The quality of the printouts is always unmatched for the Canon printers. For image printing, the Canon MG3200 printer is the first choice. So, if you want to know about the easy steps for Canon PIXMA MG3200 Driver & Wireless Setup, then you have tapped on the right point. This guide is the complete package for you so that you can do the Canon MG3200 WiFi setup easily. Without wasting much time, let’s get started with the setup.

Steps for the Canon MG3200 WiFi Setup

The wireless setup has become most prominent these days because of the availability of the wireless network everywhere. So, every printer is now supporting the wireless connectivity in the printers. Before you start the process of the wireless setup for the Canon MG3200 printer, make sure the following things are accomplished:

  • The printer should remain ON during the whole process of the setup.

  • You should connect the computer to the same network with which you are going to connect the printer.

Once you have completed these two steps, then you can start with the wireless setup of the printer.

Canon MG3200 Wireless Setup

  • First, keep the maintenance button pressed for around 5 seconds on the Canon printer.

  • The LED on the digital display panel will start flashing.

  • Now, press the Fit to Page button present on the panel of the printer.

  • The LED should keep on flashing.

  • Then, keep the WPS button pressed on the router with a time difference of 1-2 minutes.

  • The blue LED light for WiFi will keep on flashing while searching for the WiFi network.

  • Now, on successfully connecting to the network, all LED lights will glow for 3 seconds, then change to 1.

  • After that, the blue WiFi LED light will also change into solid light.

Therefore, these steps will complete the Canon MG3200 Wireless Setup for the printer. But, to start printing with the printer, there is a need to install the printer driver software into the system. So, follow the next section to complete the most important phase now.

Canon MG3200 Driver Setup

Once you are completed with the wireless setup, then you can start with the driver setup of your Canon printer.

  • Go to your computer system now.

  • Then, launch the updated web browser, and recommend Google Chrome as it is safe.

  • Now, visit the official website i.e.

  • Then, type your printer name and printer model in the search field.

  • The other page for your printer will open.

  • Select the Drivers and Downloads tab from the page.

  • Then, the list of the recommended drivers and softwares associated with your printer will open.

  • Select the full-featured driver software, and click on the Select button to start the download for it.

  • On the completion of the download, go to the Downloads folder, and open the executive file for the Canon printer driver.

  • Click on the Run button to go to the Installation wizard.

  • Click on the Next button on the Welcome screen, and do as according to the on-screen instructions.

  • Then, the Connection Window window will also appear in the installation wizard.

  • On that step, select the connection type as the Wireless Connection.

  • Click on the Next button.

  • Then, complete other on-screen instructions till you reach the last step.

  • Click on the Finish button to complete the installation.

  • Take the test printout for the confirmation of the proper setup.

So, these all steps will complete the Canon PIXMA MG3200 Driver & Wireless Setup and you are all set to take the printouts and that too wirelessly.

Canon MG3200 WiFi Setup is Complete!

So, as you can see, this guide has explained everything in detail and in easy steps for  Canon PIXMA MG3200 Driver & Wireless Setup. So, you don’t need to connect the wires to the printer now. Just complete the Canon MG3200 WiFi setup, and you are ready to use your printer wirelessly. So, print from anywhere in the network and get the best quality printouts with Canon MG3200.