How to Connect Brother Printer to WiFi
Every printer is coming up with the feature of wireless connectivity. Though, the method used to be different for every printer. Therefore, if you are looking for the steps for brother printer WiFi setup, then you are at the right place. This guide will explain to you all the steps to connect brother printer to WiFi. Even, if you are facing any issue, then also you will get your problems resolved here for brother printer WiFi setup. So, let’s get started with the steps first!
Steps to Connect Brother Printer to WiFi
Before you connect the printer to the network, there are certain things that you should know at first and those are:
Network name of your existing router.
Network password if it is not open.
If you know about your router’s network information, you can proceed with the steps to connect brother printer to WiFi.
Connect your Brother Printer to the power source and then turn it on.
Press the Menu button on the control panel of the Brother’s printer.
Use the arrow keys to navigate the Network option, and press OK to select it.
Then, again use arrow keys to go to the option of WLAN, then again to select press OK.
Now, select the Setup Wizard with the arrow keys and press OK.
After that, the message will appear for “WLAN enable?”
Select the option of Yes for enabling the wireless network.
Now, the brother printer will look for the available WiFi network.
Select the network name of your existing router, and then press Ok on the printer.
If the network is not open, then it will ask for the password. Enter the password for your network.
Then, press OK to authenticate the device.
Now, the brother printer will be connected to the WiFi.
If it got successfully connected, then a message will appear “Connected” on the display.
Otherwise, the WLAN error code will appear on the display.
Now, once the download is complete, then there is a need to install the printer driver.
Visit the official website of Brother Printer.
Then, go to the Downloads section and then to Full Driver and Software Package.
The on-screen instructions will come up, then follow them.
So, after the installation of the printer driver, you can continue with the printing with Brother Printer. In case, you are facing some issues with the Brother printer WiFi setup, then there are certain ways to resolve it.
Troubleshooting Brother Printer WiFi Setup!
If you are facing some trouble with the Brother Printer WiFi setup, then it is impossible to complete the printing job with the Brother Printer. To resolve this issue, you should follow the steps given below:
Solution 1: You need to make sure Brother Printer is in the state of ready to use. To confirm this, check the following:
Brother Printer is in On state.
There is no error being shown on the display.
Brother printers should not be in sleep mode.
Brother Printer is set as the default printer for your system.
Status for Brother Printer should be online in your system.
Delete all the previous pending printing jobs in your system.
Solution 2: Make sure the wireless connection is working fine and the printer is connected.
Check there should not be any fluctuation in the internet connection.
Try to access WiFi on some other device to identify the issue with the network.
Try to reconnect the Brother Printer with the wireless network again.
Solution 3: Make sure the system is connected to the right wireless network.
Both the printer and system must be connected to the same wireless network.
Use a network repair tool to identify the issue with the network.
Again, complete the Brother Printer WiFi setup if some step is missed and creates the problem.
Brother Printer Connected!
So, by following the steps mentioned above, you will be able to complete the Brother Printer WiFi setup. Also, there are instances when you are not able to complete the wireless setup for the Brother printer. For this purpose, the troubleshooting steps are also explained to make you connect Brother Printer to WiFi. Therefore, now your brother printer is connected and you can continue with your printing.
