A Quick Guide For Brother Printer Troubleshooting

Brother printers are recognized as the best printer for offices. But, nobody likes to have trouble with anything. The same is the case with the Brother printers. So, if you have troubles with the Brother printer, and are looking for help with Brother printer troubleshooting, then you are in the right place. This guide will let you know about how to fix brother printer problems. So, follow the simple steps and get your problems resolved in no time.

Some Basic Issues

Some basic issues that one can face with the Brother Printers are:

  • There is no LED lighting for the power indication.

  • The cables are not properly connected.

  • The paper is jamming in the Brother printer.

  • There is orange or blinking light signifying the printer error.

  • Ink related issues.

So, these are the common issues that usually the brother printer used to have. Therefore, now there is a turn to look into the steps to resolve these issues.

Steps for Brother Printer Troubleshooting

Solution 1: For No Power Indication

  • Make sure the power is ON from the supply.

  • Also, ensure that the printer is in ON state.

  • Then, check the LED for the power indication whether it is lighting or not.

  • If no LED is lighting for the power, then restart your printer as per the power cycle, and check again.

  • In the power cycle, you will turn off the printer, and then turn off the supply from the power source.

  • Wait for around 30 seconds.

  • Now, connect the plug to the power source, and turn on the power for the printer. 

  • This will restart your printer resolving some internal issues.

Solution 2: Connect Cables Properly

Sometimes, the cables are not properly connected. They may also be connected to the wrong ports. Therefore, follow the steps given below to check this issue.

  • Make sure the USB cable is connected to the system, and in the right port.

  • Ensure that the power cable is also properly connected to the system and the printer maintaining the proper connection.

Solution 3: Paper should not get stuck/ jammed in the printer

If the paper is getting stuck in the printer during the printing operation, then either you will get crumbled, or you will get a misprint. Therefore, follow these steps to resolve the issues given below:

  • Make sure you are inserting a sufficient amount of paper in the paper tray.

  • The papers should not exceed the limit as it will let the printhead move freely.

  • If there is a single paper, and still there is a problem, then check for any obstruction in the printhead.

  • Clean the area of the printhead as it should move smoothly.

  • Make sure you are not inserting the crumbled paper into the printer.

Solution 4: The error light is blinking in the printer

When the error light is lighting on orange color on the Brother printer, or some LED is blinking, then it means, there is some issue with the Brother printer. In that case, follow the steps given below to get the solution for this problem.

  • Check the cartridge ink levels.

  • Also, ensure that there is no dirt or obstruction on the printhead affecting the printing.

  • Check the printer is properly connected to the system.

  • Restart your printer, and check if still, there is an error light.

Therefore, these are some of the troubleshooting steps for the Brother printer. These are the instant solutions that you can apply and get your job done quickly.

No More Troubles!

Summing up! These steps will make you feel relaxed as you will now have no more troubles with your Brother Printer. These Brother printer troubleshooting steps are the quick fix to your printing issues as no one has extra time in this fast-paced world. So, follow these steps for how to fix brother printer problems and get the solutions to your problems for Brother printers.