How To Resolve Brother Printer Not Recognizing New Toner Cartridge

Not every toner cartridge can be used for the printer. There are specific toner cartridges for every printer. And, the printer needs to recognize the cartridge to print. But, what to do if Brother printer says No toner after replacing? Without toner, it is not possible to print. Therefore, it is important to resolve Brother Printer not recognizing new toner cartridge issues. So, let’s find out the steps to resolve this issue so that you can continue with printing using the Brother printer.

Why Does Brother Printer Says No Toner After Replacing?

The reasons that make Brother Printer says no toner after replacing are:

  • There is no compatibility between Brother Printer and toner.

  • Your printer is not getting the indication that a toner cartridge is installed.

  • The printer is not detecting the toner cartridge.

  • The flashlights are not lighting on the printer.

  • There are low ink levels for the toner cartridge.

Steps to Resolve Brother Printer Not Recognizing New Toner Cartridge

It is important to make the toner cartridge recognizable to the printer to make the Brother Printer print. Therefore, follow the steps given below to resolve this issue:

  • Make sure you are using the right toner cartridge for your printer.

  • Whenever you remove the old cartridge, wait for around 10 minutes before you install the new cartridge.

  • If still there are issues with the new cartridge, remove it and keep it safe.

  • Now, unplug the power supply for Brother Printer and let it be disconnected for 10 minutes.

  • After 10 minutes, connect the printer to the power supply again, and reinsert the cartridge.

  • Power on the printer to check whether the printer is recognizing the toner cartridge.

  • If still not working, make sure the contact area is clean for the toner cartridge and printer.

  • Make sure you have removed all the tapes and plastic strips from the toner cartridge as it can interrupt.

  • Also, update the firmware for the Brother printer, as outdated firmware will also lead to different issues.

Therefore, in this way, you can resolve the issue of the Brother printer for the recognition of the toner cartridge. So, now you can take the required printouts without worrying much about the cartridges now.

Take Desired Printouts!

Never get into worry if the Brother printer says No toner after replacing. Usually, improper installation or instant installation leads to this problem. There is the requirement of the time for the refreshment of the memory for the printer. If it will be instantly installed, then the Brother Printer not recognizing new toner cartridge issue will arise. So, follow these steps mentioned above in the article and get rid of the problem. Therefore, now you are all set to use the new toner cartridge in the Brother printer. So, take the desired printouts and in the best quality with the Brother printer. So, get ready to take printouts.