Brother HL5370DW Wireless Setup

How to Setup Brother HL-5370DW Wireless Printer

How to Setup Brother HL-5370DW Wireless PrinterOne cannot expect their life without printers these days. At some point in their lifetime, there is a need for the printer to print or scan something important. Therefore, if you are looking for the steps regarding how to setup Brother HL-5370DW wireless printer, then you don’t need to go anywhere else. The Brother Printer used to come up with the feature of the WPS Setup, therefore, Brother HL5370DW Wireless Setup with WPS has been explained in this guide. Let’s move to the steps in order to know more.

Brother HL5370DW Wireless Setup: WPS Button

The Brother HL5370DW Wireless Setup with WPS is the easiest method for the setup. It consists of different stages. So, all the stages will be discussed one by one. Let’s get started with the steps of the first stage.

Stage 1: Wireless Settings Configuration

  • First, keep the printer in the range of the Wireless router so that there should not be the problem of internet fluctuation.

  • Now, connect the Brother Printer to the electrical power source.

  • Then, power on the printer, and make it available in a Ready state.

  • Now, press and hold the WPS button on the router for some time like 5 seconds.

  • After that, press the WPS button present at the back of the printer for around 1-2 seconds.

  • The LED light for the WPS will start lighting on the router and the printer.

  • If the Red light is glowing in front of status, then the connection is failed, and try again for the setup.

  • Greenlight is indicating the successful connection, and now you can move to stage 2.

On finishing this step, stage 1 is complete, and you have connected your printer with the network. Now, there is a need to move to the next stage i.e. Installing the printer driver. 

Stage 2: Installing the Printer Driver

If you are doing the printer setup for the first time, then there is a need to move to these stages, otherwise, the Brother HL5370DW Wireless Setup is complete with the first stage only. So, let’s start with the installation of the Printer Driver.

  • Now, make sure, your system is connected to the internet, and you are using your system as the admin.

  • If you have got the CD with the printer, then insert it into the optical drive.

  • Otherwise, go to the official website of Brother’s printer, and then download the required printer driver.

  • Now, run the installation program for the Brother Printer.

  • If the installation window asks you for the Printer model and language, then choose them.

  • If you are using the CD-ROM,  the wizard will open with the option of Install Printer driver. Click on that.

  • Now, on the next page, click on Wireless Network Users.

  • The confirmation message will appear. Click on Yes, or Allow.

  • Select the option of Driver Install only, and click on the Next button.

  • Follow the on-screen instructions, and your setup will be complete.

Therefore, in this way, your Brother HL5370DW Wireless Setup is complete using the WPS button. As you can see, how easy it is to complete the setup for the Brother Printer. Moreover, there is no need for the technician to help you out through the process. In case, you find any way to factory reset the network settings for your printer, then you need to follow the steps mentioned in the next section.

Factory Reset Brother Printer!

Due to any reason, if you want to bring all the settings to default for your printer like you want to change the password for the printer, or its IP address, then you need to follow the instructions mentioned below:

  • First, power off your printer.

  • Check that the front flap for the printer should be closed.

  • The printer should be connected to the electrical power source.

  • Find the Go button on the printer. Press and hold the Go button till the time all the LEDs on the printer will light up.

  • When you release the Go button, then all LED lights should stop lighting.

  • Follow steps 4 and 5 for six times, again and again, to bring all the settings to default.

  • Once done, restart the printer, and perform the functions that you want.

Therefore, all these are the simple instructions that you should follow for the Brother HL5370DW Wireless Setup. Moreover, the factory reset steps are also covered in this guide. Hoping so, all your queries are resolved for How to setup Brother HL-5370DW wireless printers are covered, complete your printing jobs with the best quality.