Blog

HP Printer Says Paper Jam But No Jam

Resolve HP Printer Says Paper Jam But No Jam 

When the HP printer says paper jam but no jam is there, then it means there is something else creating this issue. It is not necessary that always when the paper will be stuck in the printer, then only jam issue will come. There are other reasons responsible for this as well as the jamming issue. Therefore, to fix HP printer jammed issue, there is a need to follow a guide providing you with all possible and easy solutions. Well, you are at the right place. You just need to follow the steps mentioned below properly one by one till your issue is not resolved.

Steps to Fix HP Printer Jammed Issue

There are different reasons possible for the paper jam. The steps discussed in this section are from the basic to the advanced. You need to follow the steps one by one until you don’t find that your issue is resolved. Therefore, let’s move to the steps now.

  • In the very first step, you need to look for the areas which are making the issue of paper jam. 

  • You shouldn’t only check the paper tray, but also the rollers as they should be movable to make the printer work.

  • Check whether the carriage is moving freely or not. 

    • Power on the printer and it should not be in ON state before.
    • Open the access door for the cartridges to examine the carriage.
    • Wait for some time for the carriage to come into an idle state.
    • Let the printer turn ON, and then disconnect the printer plug from the electrical source.
    • Then check the carriage area if some object or paper is restricting the movement.
    • Remove that object or paper from the carriage area.
    • Confirm that the carriage is moving freely, and then connect it to the power source again.
    • Try to take a test print out now, if the issue is resolved then stop here.
  • Now, clean the paper feed area and rollers with the damp cloth or cotton ball.

  • If still there is a problem, then clean printer rollers to make them work smoothly.

    • Remove all the papers that are in the paper tray.
    • Then, go to the Settings on the printer, and then tap Ok on the printer.
    • With the arrow keys, navigate to Tools, and again tap OK.
    • Then again navigate Clean Paper Feed with arrow keys, and then tap OK.
    • The printer will make some noise during the cleaning process.
    • Wait for the printer to become silent, and then try to take a printout.
  • After cleaning the printer rollers, clean the ink smears for the printer.

    • To do so, load some papers into the input tray.
    • Now, go to the Settings on the printer display, and press OK.
    • Then, navigate Tools with arrow keys, and tap OK.
    • Then select the option of Clean Ink Smears with arrow keys, and tap OK.
    • Wait for the printout to get ejected from the printer.
    • Now, try to take the actual printout to test the issue resolution.
  • In the last, you can reset the printer to resolve the issue at your end.

    • Let the printer be in ON state, and disconnect it from the power source.
    • After that, wait for around 1 minute.
    • Then again connect the printer to the power source.
    • Take the test printout then resolve the issue.

Issue Resolved!

With the competition of these steps, your issue HP printer says paper jam but no jam should be resolved. Still, if you are not able to fix HP printer jammed issue, then there is a need for the service to your HP Printer. So, check the warranty, and visit the nearest service center of HP printers. So, resolve the issue, and take the desired printouts.


HP Officejet 3830 Not Printing Color

Resolving HP Officejet 3830 Not Printing Color 

The reason for using the color printers is to make the content distinguishable. The color prints used to provide better descriptive information for the data. But, sometimes, the issue of HP Officejet 3830 Not Printing Color arises making it a bit difficult to continue with the printing job. The fuzzy prints lead to frustration. But you don’t need to get frustrated as the HP Officejet 3830 troubleshooting is discussed in this article to resolve HP Officejet 3830 Not Printing Color. Moreover, these are very simple steps that one can follow easily without any help from others. So, start applying the steps one by one.

HP Officejet 3830 Troubleshooting Steps

Any problem with the printer will lead to the disruptive printing service from the HP Printer. You may get improper printer pages or missing print pages which is not acceptable at any cost. Therefore, let’s get to the steps in order to get the accurate and best quality prints from the HP Printer.

  • In Windows, uninstall and then reinstall the required printer driver for HP Officejet 3830.

  • Make sure you are using the right and genuine ink cartridges of HP for your printer.

  • Check whether there are ink smears at the back of the printouts.

  • If yes, then to resolve the ink smears issue, you need to follow the steps given below:

    • Power On the printer, and load the blank papers in the paper tray.
    • From the printer, go to the setup.
    • Then, select the tools, and then select Clean Page Smears.
    • Now, take the test printout to check whether your problem is resolved or not.
  • Make sure you are using the right paper type for your printer mentioned in the manual.

  • Check the Printer settings for the printer like the colored print settings are not in an Off state.

  • Make sure to check the ink levels available in the cartridges.

    • You will get the information about the ink cartridges at the display only.
    • If any of the cartridges has a low ink level, then replace it with the new one.
  • Also, check the ink cartridges for the HP printer should be properly aligned.

  • Take a printout for the Print diagnostics.

    • To do so, go to the Setup option at the Printer.
    • Now, go to Tools, and then select the Print Quality Report.
    • The printed Diagnostic page will let you know about the issues in the result.
  • In the diagnostic report, check about the color blocks so that there should not be white lines in between.

  • Clean the ink cartridges, then insert and align them again in the printer.

  • Replace the colored ink cartridge, and then try again to take a printout.

Servicing Required!

The steps that are mentioned in the previous section are the techniques that one should apply to resolve the HP Officejet 3830 Not Printing Color. If none of the HP Officejet 3830 troubleshooting is not working out for you, then there is a need to service your printer. So, check the warranty, and take the required action. With these troubleshooting steps, have a Happy Printing!


Brother Printer Not Printing Double Sided

Printing error
Printer Assistant Download

Fixing Brother Printer Not Printing Double Sided

These days, printers are not limited to singlet printing. Now, you can print double-sided as well at one time known as duplex printing. Mostly the Brother Printers use this feature. The duplex printing will not only save your time but also energy. Sometimes, due to certain reasons, a brother printer not printing double sided may turn into an issue, especially when you are in shortage of time. So, if you are seeking a solution to the Brother Printer Duplex Not Working, then you don’t need to go anywhere else. This article covers the reasons for the issue along with the solution. The reasons have been covered due to the reason so that you don’t face the same problem in future. So, let’s learn more about fixing the Brother Printer Duplex Not Working.

 

Possible Reasons for Brother Printer Duplex Not Working

If the Brother Printer Duplex Not Working is blocking your progress with the work, then you need to have a sneak peek into the reasons which have made the Brother Printer not printing double sided.

With Mac OS, there are chances to face this problem as Mac OS drivers don’t support duplex printing.
In Windows or other operations systems, the issue can arise due to incompatible printer drivers.
On recently updating the operating system, if you will try to print a duplex, then the issue may arise.
If you are using any third-party plugin print service, then also, it could lead to the improper working of the Brother Printer.
If one is trying to take the printout from the corrupted files, then this could lead to Brother Printer Duplex Not Working.

Therefore, these are the possible reasons that can stop the brother Printer from printing services especially, in duplex printing. Now, after looking at the reasons, if you move to the solutions, then have a look at the next section.

Solutions to Brother Printer not Printing Double Sided

There are very simple solutions that you need to follow for the Brother Printer not printing double sided. So, try these solutions one by one in order to fix this problem.

  • Make sure that the duplex feature is on for the Brother Printer.

  • Check the updates for the Printer Driver that is compatible with your model of Brother Printer.

  • Check the page setup or paper settings carefully to make sure settings are not for the singlet paper.

  • Check the configuration for the Duplex Printing as well.

  • If you have made any changes in the settings, make sure to save the settings in order to apply.

Therefore, these are some of the basic solutions that you need to follow in the case of Brother Printer not printing double sided.  Still, if the problem is persisting, and you don’t have time to go to the technician, then follow the solution given below:

Alternative Solution:

  • First print on the one side of the paper, then reverse the stack and print the on the other side.

  • While following this solution, make sure to change the page setup with Even/Odd so that printing should get completed in actual format.

Therefore, if you are facing the issue of Brother Printer not printing double sided, then check the above-mentioned reasons, and try the solutions as described in order to get rid of the problem of Brother Printer Duplex Not Working.


Brother mfc7860dw Wireless Setup

Brother mfc7860dw Wireless Setup

As technology is changing with time, so various companies keep on upgrading the features of the printers. There is a wide range of companies which design printers that basically include print, copy, fax, and scan at a time. The unique features of the Brother printer will provide you complete printing satisfaction. Most of the Brother printers available in the market are famous for their excellent performance. If you want to enjoy the best printing experience of printing, then you must perform the Brother mfc7860dw Wireless Setup. You may visit the official website of the Brother printer to set it up. 

While setting up the brother printer, make sure that you have installed the printer drivers in the right manner. If you have downloaded the wrong drivers, then you may not be able to print the documents. Therefore, one be careful while installing the latest and compatible printer drivers.

Unboxing Steps to Install Brother mfc7860dw Printer

If you want to get the complete guidelines to unbox & install the Brother mfc7860dw printer, then you have reached the right place. Follow the steps discussed below:

  • The initial step is to unbox the Brother mfc7860dw printer.

  • After that, you are advised to check and take all the components out of the printer’s box.

  • In the Brother mfc7860dw printer’ package you will get the Installation CD-ROM, AC power cord, telephone cord, user’s guide, drum unit & toner cartridge assembly, etc.

  • Now remove the packing tapes from your printer. Make sure that you have removed all the protective tapes in order to avoid any printer problems due to the packaging material.

  • You can now lower the front cover. Then tap the desiccant packet out. 

  • You must follow all the printer unboxing setup guidelines as mentioned in the user’s manual.

  • It’s advised to shake the Brother toner cartridge and then reinstall it. Finally, close the cover.

  • After that, you can take the paper tray out of the Brother device.

  • Now load the paper sheets into the paper tray.

  • Now adjust the paper width as per the specifications.

  • In the next step, connect the Brother printer’s power cable & telephone cable with the right ports on the device & the wall outlets.

  • Turn on the Brother mfc7860dw printer.

  • You must set the language on the Brother printer screen.

  • Follow all the remaining step-up guidelines on-screen to finish the Brother mfc7860dw printer setup process.

General Steps for Brother mfc7860dw Wireless Setup

Before beginning with the wireless setup, make sure that the Brother printer is placed within the range of the router. Here are the Simple Steps for Brother mfc7860dw Wireless Setup as follows:

  • The foremost step is to connect the power cord with the perfect power source.

  • Power on the Brother mfc7860dw printer.

  • Now check if your Brother printer is in a ready state.

  • After that, press & hold the WPS button available on the router.

  • In the next step, you can locate the Wireless Setup button on the backside of the printer.

  • Make use of the pointing object to press & hold the Wireless Setup button on the Brother printer.

  • As soon as the Brother printer searches for your Wireless router, you can see that the toner lamp will start to blink.

  • Once the Brother printer is successfully connected with the router, you can now start using your printer for wireless printing.

  • This is how your printer successfully gets connected with the router.

Important Guidelines to Install the Brother mfc7860dw Driver For Windows

To perform the installation of the Brother mfc7860dw Driver For Windows is quite easy. Follow the steps mentioned below:

  • You can download the driver Brother mfc7860dw from the official website of the brother.

  • The download file will get automatically downloaded in the Downloads folder on your PC.

  • Once the downloading process gets completed, you must extract the file.

  • Choose the menu ‘Setup’ and after that right-click on the Select ‘Run as administrator’ option.

  • You must follow the installation procedure and then tap on the Next button.

  • Click on the Finish button.

  • As soon as the printer drivers installation process is completed, you can now try to print the documents in order to check the functioning of the printer.

Though the process for Brother mfc-7860dw Wireless Printer Setup is quite easy. But some users may still face challenges while understanding the above-mentioned steps, then you may refer to the printer’s reference manual. Want to get the finest quality of print-outs? If yes, then set up the Brother printer today and experience the unique printing capabilities of the printer.


HP Deskjet Plus 4155 Setup

Complete Guide for HP Deskjet Plus 4155 Setup

HP Deskjet Plus 4155 Wireless Setup Are you looking for a guide having steps of HP Deskjet Plus 4155 Setup? Facing difficulty in HP Deskjet Plus 4155 wireless setup? Need solutions for HP Deskjet Plus 4155 connect to WiFi issues? Well, You are at the right place! Here, you will get all of the details associated with the HP Deskjet Plus 4155 printer. 

About HP Deskjet Plus 4155 Printer

HP Deskjet Plus 4155 is an all-in-one printer having a compact size design and offers great functionality to its users like printing, scanning, copying, and faxing. It is easy to set up, has better and faster connectivity, an automatic document feeder, and saves time with versatility. All of these features make it suitable for home and business printing requirements. It supports both wired and WiFi connections. The other media supported by this printer include photo paper, cards, plain papers, labels, and envelopes.

Guidelines for HP Deskjet Plus 4155 Setup

Follow the below set of instructions for HP Deskjet Plus 4155 setup for the first time:

  • Firstly, remove all the packing material including tape from the printer and the accessories that come along with the printer.

  • After this, place your printer on a smooth and safe surface that is nearer to the power outlet.

  • Connect your printer to the power socket using the power cord.

  • Turn on your HP Deskjet Plus 4155 printer by pressing the power button for 5-10 seconds.

  • Open the access door of your printer and insert the ink cartridge into the respective ink slots. After this, close the door.

  • In the next step, open the input paper tray and fill it with the printing sheets.

  • Now, download and install the suitable printer driver. Make sure that you have done the network setup properly.

  • At last, take a test of printing to confirm whether the printer set is done correctly or not.

How to Download Printer Driver for HP Deskjet Plus 4155 Setup?

Go through the below steps to download the printer driver for your HP Deskjet Plus 4155 setup:

  • Launch the web browser and enter the official HP website.

  • After this, you will navigate to the main page where you have to enter HP Deskjet 4155 in the search bar.

  • Once, you reach the support page, click on the drivers, software, and firmware tab. The OS of your system will detect automatically. If you want to change OS, click to Choose a different OS button.

  • Click on All drivers and then driver product installation software. Click on the download button option under the drivers. After this, the downloaded driver file automatically saves to the downloaded folder.

  • The most recommended printer drivers are HP Easy Start printer setup and HP smart application software.

  • An alternative method to download the HP printer drivers is by clicking on the Driver Download link.

Instructions for HP Deskjet Plus 4155 Wireless Setup

HP Deskjet Plus 4155 connects to WiFi connection through two methods. The first one is by push-button configuration and another one is through PIN code. 

Method 1: Push Button Configuration

Carry out the below instructions step by step to perform HP Deskjet Plus 4155 wireless setup on your printer through Push button configuration:

  • Press and hold the wireless button on your HP Deskjet Plus 4155 printer.

  • Release the wireless button after 4-5 seconds.

  • In the next step, press the WPS button located at the front side of the wireless router.

  • After that, check whether the wireless LED light on the printer stays stable blue. 

  • If stable solid blue light blinks on the device, it means the HP Deskjet Plus 4155 connects to WiFi successfully.


Canon Pixma MX492 Wireless Setup

Canon Pixma MX492 Wireless Setup Support

Are you looking for the steps to connect Canon MX492 to WiFi? Facing trouble with Canon Pixma MX492 Wireless Setup? If YES, you are at the right place! This article will guide you in troubleshooting all the issues associated with Canon MX492 Setup. Let’s go ahead. 

Canon Pixma MX492 Wireless Setup

Canon Pixma MX492 is the wireless all-in-one inkjet printer that enables printing, scanning, copying, and faxing. With this printer, you can print the documents in high-quality and scan documents with high resolution. It supports AirPrint, Mobile printing, and cloud printing. 

After the Canon MX492 setup, the user can carry out the setup and installation procedure for their printer. One thing that is need to be focused on is to set up the printer correctly as it can create issues

How to Unbox Canon MX492 Printer?

Look at the below steps to unbox your Canon MX492 printer without any damage:

  • Firstly, you need to check that the box comes with a seal. If it is not, then return it back.

  • Open the printer’s cardboard and ensure that there are all the accessories which are mentioned on the box with the user manual.

  • Take out the Canon MX492 printer from the box and place it on the smooth surface. The place where you placed the printer should satisfy the conditions like temperature and humidity.

  • Peel off the packing materials and tapes present on the Canon MX492 printer.

  • Connect your printer to the power socket by using an electrical cable.

  • Turn on your Canon Pixma MX492 printer. Set your choices on the operator panel of the printer.

  • Place a bunch of A4 sheets into the paper input tray.

  • After that, place the original and good-quality ink cartridges into appropriate slots. After finishing the setup and installation process, try to print an alignment sheet to test your printer. 

Twelve Simple Steps for Canon Pixma MX492 Wireless Setup for Mac

Follow the below instructions for Canon MX492 Setup to WiFi for your Mac devices:

  • Firstly, you need to ensure that you have completed the initial printer setup. Make sure that ink cartridges are full.

  • Turn on WiFi router to initiate the Canon Pixma MX492 Wireless Setup procedure.

  • After that, enable the WiFi network option on your printer.

  • Click on the Setup menu and then choose the Wireless LAN setup option.

  • Now, your printer scans for all the available networks. Select your wireless network.

  • Press the WiFi button present on your router.

  • Select on the Manual Setup under the Wireless LAN setup. After that wait for some time until your printer establishes a wireless network successfully.

  • Connect your printer to the network with which your printer is connected.

  • Download the printer driver from the official site of Canon and install it according to the instructions.

  • Choose setup & network type during the installation of Canon MX492 Setup for Mac. 

  • Complete on-screen instructions to complete the installation. 

  • Try to test your printer once you have completed the Canon Pixma MX492 WiFi Setup procedure. 

Procedure for Canon Pixma MX492 Wireless Setup for Windows

Follow the below instructions step-by-step as demonstrated below for Canon MX492 Setup for Windows:

  • Turn on your Canon Pixel MX492 printer.

  • Make sure that the wireless router is powered on.

  • In the next step, you need to check that your computer and Canon Pixel MX492 printer are connected to the same WiFI network. If they do not connect to the same network then it creates problems. 

  • Now, install the Canon Pixma MX492 printer using the installation CD that comes along with it. Also, download the printer drivers and software from the official site of the Canon printer. 

  • Open the downloaded printer driver file to start the installation process. Click on the Next button on the Pixma series page.

  • After that choose your printer and wireless connection method.

  • A list of all the available printer displays on your network will show on the system screen.

  • Select your printer from the available list. Tap on the Next button to proceed to other steps.

  • Complete on-screen instructions in order to finish the Canon Pixma MX492 Wireless Setup procedure.

  • Try to test your printer whether your printer setup is done properly or not.