Blog

HP officejet 3830 scan to email

How to do HP Officejet 3830 Scan to Email Setup

Most of the time, the scanning of the document used to be done to email something. It is like just scan the document or report, or email it. But, it is not possible to do it without the HP Officejet 3830 scan to email setup. So, in case you want to convert the HP Officejet 3830 scan to email, you need to follow certain instructions for making it possible. Though, these instructions are not the difficult ones. So, get to know about the steps, and apply them carefully.

Steps for HP Officejet 3830 Scan to Email Setup

The steps are very easy if followed properly and you will be able to email the scanned copy. But, to do so, follow the steps given below:

  • First, you need to find the IP address for your printer. 

  • To find this, go to the control panel and then go to the printer properties.

  • Now, in the address bar, enter the IP address of the printer.

  • Tap Enter on the keyboard.

  • The homepage for your printer will open on the screen.

  • Now, go to the Scan tab.

  • On the left-hand side, select the option of Scan to Email setup.

  • The dialog box with the heading Redirecting to Secure Page will open, and click on the OK button.

  • The website’s security display may also appear, then click on Continue to this website option.

  • Then, the option of Scan to Email setup will appear, click on that.

  • On the screen, select the Outgoing email Settings, then complete the following details:

    • In the Default From, enter the email address that you want to use to send the email.
    • In the Default Name, enter the name of the sender like John Kale.
    • SMTP Server field will have the server address for your network.
    • And, the SMTP port value will be set to 25 automatically.
    • The email Login authentication may ask you to enter the password for your email.
  • After completing these settings, click on the Outgoing Email Test button to test for confirmation of setup.

With this, the setup is complete for HP Officejet 3830 scan to email. But, the work does not end here. Now, have a look at the steps to use this feature.

HP Officejet 3830 Scan to Email Steps 

There are very few steps you need to follow, and you are done to send your scanned copy via email through the printer only. So, go with the instructions given below:

  • Go to the control panel of your printer, and select the option of Scan.

  • Now, touch the option of email.

  • Select the address for the From, if there are multiple addresses.

  • Enter the subject for your mail in the Subject line from the keyboard displayed on the panel.

  • Select Done, and then enter the email address for the To option to mail.

  • Now, put the document in the scanner which you want to mail, and press the Start Scan option.

That’s it! You have sent the mail for the scanned copy. So, these are the steps to complete the HP Officejet 3830 scan to email process for your printer. Now, there is no need to send the scanned document first to the system. You can directly do it from the printer, saving a lot of time for you.


HP color laserjet pro mfp m281fdw troubleshooting

Troubleshoot HP Color LaserJet Pro MFP M281fdw Printing Issue

You are giving the print command to your printer but there is no response. It is just like there is no communication between the HP printer and the system. Well, this can happen because of the firewall. To troubleshoot the HP Color LaserJet Pro MFP M281fdw printing issue, you need to follow certain steps for the configuration of the firewall again. First, have an idea about the issues that may arise due to firewall defenders and then move to the steps for HP color laserjet pro MFP M281fdw troubleshooting. Let’s get started!

Issues with Firewall Blocking!

There are some major issues that you may not have noticed ever are happening due to the firewall blocking. Get an idea with the list mentioned below:

  • The printer driver is not being installed.

  • You are not able to find your printer over the network.

  • Only some of the functions of the HP printer are working fine.

  • The HP printer has suddenly stopped printing.

  • The printer is connected to the network, but still showing not connected.

So, you may have noticed that all these are the major issues that you have encountered once in a lifetime with your HP printer. So, let’s find out the solution for this below.

Steps for HP Color Laserjet Pro MFP M281 FDW Troubleshooting

As you know the reason for the issue, now is the time to find the solution for your problem, and then apply it via steps. So, follow the steps given below in order to resolve this issue:

  • At first, there is a need to disable the firewall for some time to allow the communication.

  • Now, download the HP Print and Scan Doctor software. Skip this if already installed.

  • Then, run the software.

  • The wizard will open the Network tab.

  • From there, select the option for Troubleshooting Firewalls.

  • Select the enabled firewalls names and make them disable.

  • On disabling the firewall, try to install the printer driver again to your system.

  • Or, perform any other function that is stuck because of the Firewall.

  • Once, your job is done, there is a need to configure the firewall for future use.

  • Go to the Control Panel in Windows and then select the System and Security option.

  • Click on the Windows Defender Firewall option present on the left-hand side.

  • Scroll down the opened list, and allow everything for HP printers.

  • Then, go to the Advanced Settings.

  • Select the option Outbound Roles.

  • Go to the column Remote Port and sort it according to numerics.

  • Enable every port for the HP Printer or create the missing ports.

  • Once done, click on the Next and then Finish button.

With this, the configuration of the firewall is complete, and now you can enable the firewall and can work with the HP printer smoothly. 

Problem Resolved!

So, these are the simple steps for HP color laserjet pro MFP M281fdw troubleshooting making your work easier. This is the issue that is being ignored but got the resolution here. So, get your problem resolved for the HP color laserjet printer, and keep printing!


Download canon printer software without CD

How to Install Canon Printer Without CD

It is not always necessary to have the CD to complete the printer setup in your system. In the age of the internet, you can install the printer driver and complete the printer setup without a CD. Moreover, these days, CDs don’t come up with the printer. So, if you want to know download canon printer software without CD, then you can have a complete guide here. The steps for how to install canon printer without CD are explained here for both word and wireless connection. The only thing you need to take care of is to have a stable internet connection. So, get to know more about this!

Wired Method to Download Canon Printer Software Without CD

In the wired method, the printer will connect with the system using the USB cable. Therefore, the steps to download the Canon Printer software without CD with the wired method are as follows:

  • First, connect the Canon Printer and your system properly with a USB cable.

  • Now, click on the Start menu.

  • Then, go to the Control Panel.

  • After that, right-click on the Devices and Printers. 

  • The list of the devices will open that are connected to your system.

  • Then, select the name of your Canon printer, and click on its properties.

  • Now, note down the model and all details for your Canon Printer.

  • In the Windows Explorer Search bar, type the Device Manager.

  • The window for Device Manager will open, select the Other Devices option from it.

  • If you have previously installed the Canon Printer driver, then it will be displayed there.

  • Right-click on Canon’s printer driver, and then select the Update Printer Driver option.

  • In the next window, select the option of “Browse my computer for driver software”.

  • Select “Let me pick from the Canon drivers on my computer”, then click on the Next button.

  • Select the Printer driver you want to update, and click on Next.

  • Follow the on-screen instructions till you reach the last step.

  • In case, the Canon printer driver is not installed, then launch a web browser.

  • Now, go to the Canon Printer’s official website, and download the required printer software.

  • After downloading, look for the file in the Downloads folder.

  • Run the downloaded file to install the software/ printer driver in the system.

  • The on-screen instructions will help you through the process of the installation of the printer software.

  • After the finish of the installation, restart your system once to apply the settings.

  • Take a test print-out to check the status.

This method needs to be followed when you want to connect your printer with the wired method. But, if your Canon printer has the WPS button, then you can use the wireless method for the installation of the printer software.

Wireless Method to Download Canon Printer Software Without CD

Now, in case you want to use the wireless method for the installation of the Canon Printer, then you need to have the WPS button in your printer, and in the router. So, if this condition satisfied, then follow the steps given below:

  • Turn on your Canon printer first.

  • Press the WPS button of your router for around 2 minutes till LED lights start glowing.

  • Now, keep the WiFi button pressed for the printer.

  • You have to keep it pressed till the alarm LED light flashes blue for at least one time.

  • Now, keep pressing the WPS button of the printer within 2 minutes.

  • Release when all the power and the WiFi LED lights of the printer will get stable and stop flashing.

  • The Canon printer is connected now.

Now, you can take a test printout for the confirmation of the connectivity, and the printer driver will be installed automatically in your system.

No CD required!

So, from the above steps, it is clear that it is possible to download canon printer software without CD. Therefore, in order to know how to install canon printer without CD, follow the guide mentioned above, and get the solutions to all your problems for the Canon printer.


HP printer connected to wifi but offline

Get HP Printer Offline Fix

HP Printer is the leading brand in the world of printers. Every company wants to make their service smooth for their customers. Therefore, in case, HP printer connected to wifi but offline status is being shown, then this also needs troubleshooting for your printer. When the HP printer showing offline status, the issue can be with the HP printer or with the system. So, let’s go through the steps to find the HP printer offline fix. But first, get to know about the issues leading to the HP printer showing offline.

Why HP Printer Showing Offline?

Most of the time, this problem comes when the new updates get installed into the system, and it used to become incompatible with the previous versions. The reasons are:

  • The system is working on Windows 8 or previous versions.

  • The printer is working on the network.

  • The driver is not properly installed in the system.

  • The printer and system are not connected to the same network.

So, to resolve this issue, you need to follow certain steps to solve this problem.

Steps for HP Printer Offline Fix

There are very simple steps to resolve this offline issue of the printer. Following are the steps you need to take a look at to fix the HP Printer offline status:

  • Check whether the printer and system are connected to the same network.

  • After that, open Windows Explorer.

  • Then go to the Control Panel, and then select the Printers and Faxes folder.

  • Now, the list will open for the printers that are currently connected to your system.

  • Select the printer ion which you want to work and want to change status to online.

  • Then the printing jobs pending with this printer will open up.

  • Now, in the menu bar, select the Printer tab.

  • Unselect the option of “Use Printer Offline”.

  • Now, the status for your printer will turn online.

Now, you can check that your printer is working online and you can complete your printing job. This method is the simplest method that you can use to troubleshoot HP printer connected to wifi but offline status issues. If this method has not worked for you in the right way, then there is an alternate method available as well to help you out.

Alternate Method to Resolve HP Printer Showing Offline

In case, you have tried with the above method but still, the problem has not been resolved, then there is an issue with the printer driver. So, the solution that is left is to first uninstall and then install the printer driver again. The issue is coming because you have not installed the full feature printer driver for your HP Printer. So, you will install the full feature printer driver in these steps. To do so, follow the steps given below:

  • In the very first step, first you need to uninstall all the drivers you have installed previously.

  • Now, go to Windows Explorer, and search for Devices and Printers.

  • The Devices and Printers folder will show up, click on that.

  • From the list of printers, select the name of your printer.

  • Right-click on it to remove the printer setup from your system.

  • Now, open the web browser and visit the HP printer’s website.

  • Then look for the printer’s driver software for your printer.

  • On finding the suitable software, click on the Download link.

  • It will take a few minutes to complete the download.

  • On the completion of the download, open the installed file in the Downloads folder.

  • Now, click on Run and install all the files for the driver.

  • Make sure you should not skip any file for the installation to have the full-feature driver.

  • Again establish the wireless connection of the printer to the system.

This alternate method will surely provide the HP printer offline fix. Now, if you will check the working status of your printer, then it will be online now. 

The Printer is Online!

The above mentioned are the steps to turn the HP printer showing offline status to online. First, you need to follow the basic steps for the resolution, and then follow the alternate method if the issue is not resolved. So, now the HP printer connected to wifi but offline is gone, and your printer is online now to complete your printing jobs.


Brother Printer WiFi Setup

How to Connect Brother Printer to WiFi

Every printer is coming up with the feature of wireless connectivity. Though, the method used to be different for every printer. Therefore, if you are looking for the steps for brother printer WiFi setup, then you are at the right place. This guide will explain to you all the steps to connect brother printer to WiFi. Even, if you are facing any issue, then also you will get your problems resolved here for brother printer WiFi setup. So, let’s get started with the steps first!

Steps to Connect Brother Printer to WiFi

Before you connect the printer to the network, there are certain things that you should know at first and those are:

  1. Network name of your existing router.
  2. Network password if it is not open.

If you know about your router’s network information, you can proceed with the steps to connect brother printer to WiFi.

  • Connect your Brother Printer to the power source and then turn it on.

  • Press the Menu button on the control panel of the Brother’s printer.

  • Use the arrow keys to navigate the Network option, and press OK to select it.

  • Then, again use arrow keys to go to the option of WLAN, then again to select press OK.

  • Now, select the Setup Wizard with the arrow keys and press OK.

  • After that, the message will appear for “WLAN enable?”

  • Select the option of Yes for enabling the wireless network.

  • Now, the brother printer will look for the available WiFi network.

  • Select the network name of your existing router, and then press Ok on the printer.

  • If the network is not open, then it will ask for the password. Enter the password for your network.

  • Then, press OK to authenticate the device.

  • Now, the brother printer will be connected to the WiFi. 

  • If it got successfully connected, then a message will appear “Connected” on the display.

  • Otherwise, the WLAN error code will appear on the display.

  • Now, once the download is complete, then there is a need to install the printer driver.

  • Visit the official website of Brother Printer.

  • Then, go to the Downloads section and then to Full Driver and Software Package.

  • The on-screen instructions will come up, then follow them.

So, after the installation of the printer driver, you can continue with the printing with Brother Printer. In case, you are facing some issues with the Brother printer WiFi setup, then there are certain ways to resolve it. 

Troubleshooting Brother Printer WiFi Setup!

If you are facing some trouble with the Brother Printer WiFi setup, then it is impossible to complete the printing job with the Brother Printer. To resolve this issue, you should follow the steps given below:

Solution 1: You need to make sure Brother Printer is in the state of ready to use. To confirm this, check the following:

  1. Brother Printer is in On state.

  2. There is no error being shown on the display.

  3. Brother printers should not be in sleep mode.

  4. Brother Printer is set as the default printer for your system.

  5. Status for Brother Printer should be online in your system.

  6. Delete all the previous pending printing jobs in your system.

Solution 2: Make sure the wireless connection is working fine and the printer is connected.

  1. Check there should not be any fluctuation in the internet connection.

  2. Try to access WiFi on some other device to identify the issue with the network.

  3. Try to reconnect the Brother Printer with the wireless network again.

Solution 3: Make sure the system is connected to the right wireless network.

  1. Both the printer and system must be connected to the same wireless network.

  2. Use a network repair tool to identify the issue with the network.

  3. Again, complete the Brother Printer WiFi setup if some step is missed and creates the problem.

Brother Printer Connected!

So, by following the steps mentioned above, you will be able to complete the Brother Printer WiFi setup. Also, there are instances when you are not able to complete the wireless setup for the Brother printer. For this purpose, the troubleshooting steps are also explained to make you connect Brother Printer to WiFi. Therefore, now your brother printer is connected and you can continue with your printing.


Connect canon printer to laptop

How to Connect Canon Printer to Laptop Wirelessly

With the advancement in wireless technology, connecting devices is becoming easy day by day. Moreover, printers are not way away from it. Now, they can connect wirelessly and you can take a print from anywhere. Therefore, it is good to know how to connect Canon printer to laptop wirelessly. In order to know the steps to connect Canon printer to laptop, you need to follow this guide. Moreover, these steps will also help you to know how to setup Canon Wireless Printer. So, let’s start with the steps.

Steps for how to setup Canon Wireless Printer

In order to connect the Canon printer to laptop wirelessly, there are two methods possible:

  1. WPS method 

  2. Standard Wireless Method

In case you want to connect your printer via WPS method, then you need to make sure the following things:

  1. Your printer and router should have WPS button.

  2. Your network should follow WPA/WPA2 security protocol in order to connect with the WPS method.

So, after making these things available, you can continue with the WPS method to connect Canon Wireless Printer.

WPS Method

For connecting the Canon printer wirelessly with the WPS, follow the instructions properly given below:

  • Press the power button to turn on the Canon printer.

  • Then, press and hold the WiFi button present at top of your Canon printer till the LED light flashes for WiFi.

  • Now, press and hold the WPS button of the router for around 2 minutes.

  • The LED light on the printer will keep flashing on the printer in search of the network.

  • The LED and power light will flash simultaneously when the printer is connected to the router.

  • Now, the WiFi light will stop flashing, and continue to lit till it is connected.

  • Now, load the papers in the paper tray of your printer..

  • After that, tap and hold the Resume/Cancel button of your printer till the LED light doesn’t flash for 15 times.

  • Then, release it and the network information page will get the printer itself showing the status of the printer

So, now your printer’s wireless setup is complete with the WPS button, and you can take the printouts from anywhere via laptop. The only thing you need to take care of is that both the devices i.e. printer and laptop should be connected to the same network. In case, your device doesn’t have the WPS button, then you need to follow the standard wireless method.

Standard Wireless Method

If you are looking for the simple method to connect the Canon printer wirelessly, then you can rely on the standard wireless method. The steps for the standard wireless method:

  • Start your laptop and connect it to the internet.

  • Now, install the application “Canon IJ Network Device Setup Utilities”.

  • Once installed, then run the application.

  • Now, power on the printer, and connect it to the laptop via USB cable.

  • Select the radio button for the USB in the connection option.

  • Follow the on-screen instructions to complete the setup process.

  • After completing the setup process, select the IPv4 for the connection option.

  • Now, enter the password for your printer i.e. printer’s serial number.

  • From the list of the available networks, select the network name of your router.

  • Enter the WiFi password if prompted or not an open connection.

  • Remove the Usb cable, and the printer’s wireless setup is complete for your device. 

  • To print wirelessly, you need to add your printer in the devices list.

  • Go to the control panel, and add your Canon Printer as a device.

By adding the printer, now you are all set to take the printouts wirelessly without while being present in the same network.

Connected Wirelessly!

By connecting wirelessly to the printer, most of your problems have resolved as you don’t need to connect your printer first via wires to take the printouts. The steps for how to connect Canon printer to laptop wirelessly are discussed in detail. Therefore, just give the command to the printer, and your work is done.


Brother Printer Default Username and Password

How to Know About Brother Printer Default Username and Password

Have you noticed during the setup of the printer or router for the first time after making a purchase? In the process of setting up these devices, there is one step to enter the default username and password. Though, some of you know how to find them, or where to locate them. But, for Brother Printer, there are two default logins: User and Administrator. So, to know about the brother printer default username and password, you need to follow this guide. Along with that, you will also get to know how to complete the brother printer default login. This will help you to complete the setup of your printer for taking the printouts. So, without wasting any time, get guided with the steps.

Brother Printer Default Username and Password

Most of the time, people used to complete the setup wirelessly for the printer. This comes in the category of the Web-based setup or the emote setup. In this case, for the setup process, there are two default usernames and passwords. One is for the user, and the other is for the administrator who will have the control for settings of the printer. Usually, the default username and password for the Brother Printer are the ones that are mentioned below:

CategoryUsernamePassword
Administrator adminaccess
Useruseraccess

If these brother printer default username and password don’t work, then there are the following methods that will help you to know about the brother printer default login credentials:

Tips: 
  • You can for the sticker on the printer on which the default information is mentioned.

  • You can check for the manual given along with the printer.

  • Otherwise, you can go to the Brother’s printer website, to get to know about the default details.

  • In case, you are not able to log in with the default credentials, then someone has changed them.

  • So, complete the factory reset procedure to bring all the settings to the default for Brother printer.

Now, if you have the default login details, and you want to know about the steps for the Brother Printer default login, then the steps are covered here for you.

Steps for Brother Printer Default Login

The procedure for the default login is quite easy and will take a few minutes. So, let’s follow the instructions for the default login given below:

  • Turn on your Brother Printer.

  • Now, in your system, go to the All Programs in Windows Explorer.

  • Then Select Brother> [Your Printer model]> LAN/Remote Setup.

  • Now, enter the password as asked using the one discussed above.

  • Click on Login.

Therefore, this simple procedure is there for the Brother Printer Default Login.

You Have Control!

With this default login, you will have the access to the settings of the printer, as you can now change the password for security purposes. Also, it is always suggested to change the Brother Printer default username and password to avoid unauthorized access for the hackers. So, you have control of your Brother Printer. So change the default settings and enjoy printing.


WPS Pin HP printer

Where to Find WPS Pin on HP printer

The WPS setup or the WiFi Protected Setup is the easiest way to complete the setup within seconds. In order to connect the printer with your router with the WPS method, you need to know about the WPS pin. But, most of you don’t know where to find WPS pin on HP printer. So, here are the steps to help you out to find a WPS Pin HP printer. On connecting the printer with the router using the WPS method, you can take the printout from anywhere while being in the proximity range of your router. Usually, during the HP printer setup, when you install the HP printer driver, then a WPS pin is needed. At that time, the prompt will ask you to enter the WPS Pin for your printer. So, let’s get to know about the steps in order to find a WPS Pin HP printer.

Steps for Where to find WPS pin on HP printer

Finding the WPS Pin Printer is not a difficult task if you are doing it in the right way. In order to do so, you need to follow the steps given below:

  • Start your HP Printer with the Power button.

  • Now, on your HP Printer, locate the option of the control Panel.

  • Then, press the wireless button and select the option of Settings.

  • Then, navigate the option of the WiFi Protected Setup.

  • After that, the display of the HP Printer will show you the prompts.

  • Follow the instructions and complete the prompts.

  • In one of the prompts, you will find the option of the Pin.

  • Select that option of the Pin on display.

  • With this, the WPS Pin will get displayed on the HP Printer screen.

Now, you have found the WPS Pin HP Printer, therefore you can use it for your setup. But, if you are confused about how to complete the setup of the HP Printer with a WPS button. Then, to make the process more clear for you, the steps are defined in the next section.

Steps for HP Printer Setup with WPS Pin

  • Turn On your HP Printer.

  • Go to the Control Panel of your HP printer.

  • Tap the wireless settings, and then the Settings button.

  • Then select the option of the WiFi Protected Setup option.

  • The on-screen instructions will open up.

  • Follow the on-screen instructions properly.

  • In the instructions, you will get the WPS Pin for your printer.

  • Now, open the configuration settings for your router in the system.

  • Enter the WPS pin in the designated field of configuration settings.

  • With this, your HP Printer setup is complete.

  • Now, navigate to the All Programs in the Start icon.

  • Locate the HP Folder in this.

  • Then go to the Printer Setup and Software option.

  • Now, select the option of “Connect a New Printer” on your system.

  • Add your device, and you are set to go.

As your printer is now added to the system, so you can take the printouts as per your requirements. 

Easy Setup with WPS Pin HP Printer

As you have seen, if you know about the WPS Pin HP Printer, then the process of setup remains for a few seconds. Moreover, if you don’t know, you can follow the steps mentioned above 

where to find WPS pin on HP printer. Therefore, follow this guide, and complete the easy setup for your HP Printer with WPS Pin.


Epson Connect Printer Setup Cannot Find Printer

Fixing Epson Connect Printer Setup Cannot Find Printer

Before you will make the printer work on your system, you need to complete the setup for your printer. Sometimes, if your Epson Printer is not properly configured, then the common error being encountered is Epson Connect Printer Setup Cannot Find Printer. To resolve this issue, you need to again complete the setup of the Epson Printer and do the configuration on your system. This guide covers the process for the Epson Connect Printer Setup for Mac OS. Therefore, come and learn to complete the Epson printer setup for the Mac OS.

Steps for Epson Connect Printer Setup for Mac OS

The problem of unable to find a printer occurs when there is an issue during the installation process. Also, due to the download of the corrupted file, an issue may occur in the download process. Therefore, to resolve this issue, there is a need to complete the setup again for the Epson Printer. The steps for the Epson Connect Printer Setup for Mac OS are discussed below:

  • Make sure your system and the Epson printer are in the ON state.

  • Now, go to the official website of the Epson in Safari or any supported web browser.

  • From the website, download the file Epson Connect Printer Setup Utility.

  • Once the file is downloaded, then Run the downloaded file to start the setup.

  • After that, the wizard will open for the installation of the Epson Connect Printer Setup.

  • Click on the Continue button in the installation wizard.

  • With this, the Software License Agreement will open. 

  • Click on Agree, and then the Continue button.

  • Now, click on the install button to start the installation process for the Epson Printer. 

  • After installation, click on the close button, and then open the installed file.

  • Select the printer name and then click on the Next button.

  • After that, click on the Printer Registration button, and then click on the Next button.

  • The message will appear as “Register a printer to Epson Connect” as a dialog box.

  • Click on OK in the dialog box.

  • Again, agree to the Terms and Conditions for the Epson printer, and select Next.

  • In the next step, the window will open for the creation of the account. 

  • Enter the required information into the account, and then click on the Finish button.

  • For the registration of the new printer, click on the link “ I already have an account”.

  • Select the option of Add a New Printer.

  • Enter all the required details for the printer, and then click on the Add button.

Therefore, these are the steps that need to be followed in order to fix the issue of Epson Connect Printer Setup Cannot Find Printer.

The Printer is Found!

So, these steps will let you be found on the network as you have registered it again via reconfiguration. Therefore, you can complete your printing jobs now with the Epson Printer. Summing up, now you can say bye to the problem of Epson Connect Printer Setup Cannot Find Printer with the steps of Epson Connect Printer Setup for Mac OS.


Your printer has experienced an unexpected configuration problem

Resolving Unexpected Configuration Problem 0x8007007e

If you are used to doing the configuration for the printers, then there are chances that your printer has experienced an unexpected configuration problem. If you have noticed at the display screen of the printer, then the most common error code that appears is 0x8007007e. Therefore, to complete the configuration and the setup, it is important to resolve the unexpected configuration problem 0x8007007e. Usually, this error comes when one tries to access the printer via Microsoft Edge browser, tries to print the PDF, or you have tried to print the corrupted file. Well, there is no need to worry. You can fix this unexpected configuration problem 0x8007007e. You just need to follow very simple steps for the resolution of the problem. So, without wasting any time, start with the process of the resolution of the configuration problem.

How to Know About the Error 0x8007007e

There are specific messages that used to get displayed for the error 0x8007007e. Some of these messages are:

  • Your printer has stopped with an unexpected configuration problem 0X8007007e.

  • Connect to Microsoft Support for the error code 0x8007007e.

  • The system is not able to find the specific module.

So, these are the messages that will get displayed on encountering the error 0x8007007e. Therefore, in that case, to fix the unexpected configuration problem 0x8007007e, follow the instructions discussed in the next section.

Steps to Fix Unexpected Configuration Problem 0x8007007e

There are very simple steps to resolve the error code 0x8007007e creating the configuration problem. Just you need to make sure that you should follow all the steps properly without skipping anything.

  • Try to use a different web browser like Google Chrome, Mozilla Firefox other than Microsoft Edge.

  • Update the Windows to the latest version available so that the compatible files could get installed.

  • Also, update the printer drivers for your printer as the outdated driver may lead to the problem.

  • Delete the corrupted or junk files from the system.

    • First, uninstall the programs or the applications that you are not using for a long time.
    • Then, check the system for the corrupted files with the help of the System File Checker Tool.
    • These steps will make your system free of junk and corrupted files.
  • Change the Registry Entry in case you are using the remote printer.

    • There may be a case your printer is still working on a 32-bit printer driver, so change it to 64-bit.
    • The 32-bit drivers are no longer supported in Windows 10.
  • you need to copy the file with the name PrintConfig.dll to the right folder. 

    • Click on Run in the Windows Explorer.
    • Then, type spool in the Run dialog box.
    • After that, go to the Drivers folder and navigate the x64old fol
    • In this, look for the file name with the extension .dll.
    • If not found, type printconfig in the search bar of the folder.
    • Then, copy the PrintConfig.dll file.
    • Now, open the folder x64.
    • Paste the copied file in this folder at the same location as the x64old folder.
    • Then, restart your system to apply the changes in the system.

You Printer is Configured!

With these steps, your problem is resolved for the unexpected configuration problem 0X8007007e. So, after the resolution, your problem is resolved and is configured properly making it work smoothly for your required printouts. So, whenever your printer has experienced an unexpected configuration problem with an error code 0x8007007e, then always remember to follow these steps, and let your printer work for you!